Gaggenau Range EB385210 Parts

This Halogen Bulb is an OEM part for Bosch Ranges. It provides illumination for the range's interior. Continuous use or high temperatures can cause the bulb to burn out or fail.

What Causes a Bad Halogen Bulb: 
Repeated heating and cooling cycles, along with continuous use, can cause the halogen bulb to burn out or break.

Symptoms of a Bad Halogen Bulb:

• The bulb is not lighting up
• Visible signs of damage or a broken filament
• Flickering or intermittent lighting

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This metal mesh grease filter captures airborne grease and large particles from range hood airflow to help keep the vent and exhaust path cleaner and reduce greasy buildup on internal components. What it does:

• Traps cooking grease and large particulates before they reach the blower or ducting
• Helps reduce greasy residue and buildup on internal hood surfaces
• Can improve airflow consistency when the filter is clean
• Common symptom: heavy visible grease, dark film on the filter, or smoke/odors not clearing effectively

• Turn off power to the range hood or vent before servicing
• Remove the old filter per the hood's access method (clips, slides, or screws), then insert the replacement securely
• Clean or replace regularly per the appliance owner's manual; do not operate with a damaged filter

Seals side lamp glass on lawn tractors, blocking moisture and debris from the housing. Replace when glass rattles or leaks occur. Confirm fit with your model.

This oven temperature probe is the internal sensor that monitors cooking cavity temperature so the oven control can regulate heat for accurate cooking and bake results. It's a direct-replacement sensing probe for compatible Bosch ovens. What it does:

• Measures internal oven temperature and sends readings to the control board
• Allows the oven to maintain set temperatures for consistent cooking
• Common symptoms of a failing probe: inaccurate oven temps, oven not reaching set temperature, or temperature-related error codes
• Works with the oven's control system to help cycle heating elements or gas valve

• Disconnect power to the appliance before servicing to avoid shock hazard
• Handle the probe and its wiring gently; avoid sharp bends or pulling on connectors
• Verify connector orientation and secure connections to the control board per OEM diagram

This control panel lens cover protects the oven's display and touchpad area from spills, scratches and everyday wear while keeping the display visible and looking finished. It restores the appliance's appearance and helps prevent damage to the underlying controls. What it does

• Shields the display and control buttons from food splatter, grease and scratches.
• Keeps the display readable by reducing direct contact and surface damage.
• Replaces cracked, chipped or yellowed lens surfaces that obscure the control panel.
• Helps prevent moisture from directly contacting the control electronics when properly seated.

• One lens cover for the control panel.

• Disconnect power to the appliance before starting any work.
• Typically installs by removing the control panel trim or bezel; handle the lens by the edges to avoid fingerprints.
• Inspect mounting tabs or clips for damage and align carefully before snapping or fastening into place.
• If screws or additional trim are required, reuse OEM fasteners.

Control module not responding or cycles won't start? This electronic control board restores cycle control and user-interface functions. Moderate DIY repair.

Replace a bent, warped, or missing oven rack. This wire shelf installs inside your oven to provide stable support for cookware and bakeware at the correct height.

This thermal safety device automatically shuts off power to your oven when internal temperatures exceed safe limits. It acts as a backup safety system to prevent overheating and potential fire hazards. Replace this limiter if your oven won't heat at all or if it previously overheated beyond normal cooking temperatures.

Oven not heating properly or temperature way off? This temperature sensor probe accurately monitors cavity temperature for reliable cooking. Straightforward fix.

This halogen bulb socket connects and secures the oven light bulb so the interior light works reliably when the door is opened or the light switch is used. Replaces a worn or damaged socket to restore a solid electrical connection. What it does:

• Holds the halogen oven light bulb in place and provides the electrical contacts to power the lamp
• Commonly used when the oven light flickers, won't turn on, or the bulb becomes loose
• Maintains correct alignment and insulation for safe bulb operation
• Designed for direct replacement of the original socket in compatible ovens

• Disconnect power to the appliance before starting any repair to avoid electric shock
• Allow the oven and bulb to cool completely before touching components
• Handle halogen bulbs with a clean cloth or gloves; oils from skin can shorten bulb life

If your cooktop burner won't turn on or off properly, a faulty switch is often the cause. This replacement switch restores control to your cooktop.

This terminal connector provides a secure electrical connection for appliance wiring, replacing a worn or damaged spade-style terminal to restore reliable power flow. It fits into the appliance's existing terminal block for a lasting repair. What it does:

• Replaces a damaged or corroded spade terminal to re-establish a solid electrical connection
• Helps eliminate intermittent power, arcing, or overheating at the wiring junction
• Works where a right-angle terminal is required to connect a wire to the appliance terminal block
• Compatible with standard insulated or non-insulated spade-style wire terminations

• Disconnect power at the circuit breaker or unplug the appliance before inspecting or replacing terminals
• Verify terminal orientation and fully seat the connector on the mating spade to ensure a tight fit
• Use proper crimping or soldering techniques if attaching bare wire; avoid loose or exposed conductors

This protective glass cover shields the interior light bulb inside the oven cavity from heat and food splatter. Replace when cracked, discolored, or completely shattered, which can expose the bulb to damage.