Gaggenau Range EE235134 Parts

This Halogen Bulb is an OEM part for Bosch Ranges. It provides illumination for the range's interior. Continuous use or high temperatures can cause the bulb to burn out or fail.

What Causes a Bad Halogen Bulb: 
Repeated heating and cooling cycles, along with continuous use, can cause the halogen bulb to burn out or break.

Symptoms of a Bad Halogen Bulb:

• The bulb is not lighting up
• Visible signs of damage or a broken filament
• Flickering or intermittent lighting

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This metal mesh grease filter captures airborne grease and large particles from range hood airflow to help keep the vent and exhaust path cleaner and reduce greasy buildup on internal components. What it does:

• Traps cooking grease and large particulates before they reach the blower or ducting
• Helps reduce greasy residue and buildup on internal hood surfaces
• Can improve airflow consistency when the filter is clean
• Common symptom: heavy visible grease, dark film on the filter, or smoke/odors not clearing effectively

• Turn off power to the range hood or vent before servicing
• Remove the old filter per the hood's access method (clips, slides, or screws), then insert the replacement securely
• Clean or replace regularly per the appliance owner's manual; do not operate with a damaged filter

This inner door glass panel replaces a cracked, scratched or broken dishwasher door glass to restore the door's sealed surface and appearance. It provides a durable, smooth barrier that helps contain water and supports the door assembly. What it does:

• Replaces damaged or shattered inner door glass to restore door integrity and appearance
• Helps contain steam and water inside the tub by providing a smooth, sealed surface
• Reduces visible wear, scratches, and cosmetic defects on the dishwasher door
• Supports proper operation of the door assembly when installed correctly

• Disconnect power and water to the appliance before starting any repair.
• Handle glass with heavy-duty gloves and eye protection; glass can break and cause injury.
• Installation typically requires removing the outer door panel and fasteners; follow the OEM service instructions for your model.

Seals side lamp glass on lawn tractors, blocking moisture and debris from the housing. Replace when glass rattles or leaks occur. Confirm fit with your model.

A female door latch that secures the appliance door and ensures a proper close for safe operation. Replaces a worn or broken latch to restore reliable door engagement and help the appliance start normally. What it does:

• Secures the door by engaging the corresponding door striker so the appliance can run
• Helps prevent the door from popping open during operation
• Commonly replaced when the door won't stay closed or the unit displays a "door"/won't-start symptom
• Fits the OEM latch location and mates with the matching male striker to restore proper function

• One female door latch

• Disconnect power (and gas, if applicable) before servicing
• Remove the outer door panel or access panel as required to reach the latch assembly
• Align the latch with the striker and secure fasteners; test door engagement before reassembly

This oven temperature probe is the internal sensor that monitors cooking cavity temperature so the oven control can regulate heat for accurate cooking and bake results. It's a direct-replacement sensing probe for compatible Bosch ovens. What it does:

• Measures internal oven temperature and sends readings to the control board
• Allows the oven to maintain set temperatures for consistent cooking
• Common symptoms of a failing probe: inaccurate oven temps, oven not reaching set temperature, or temperature-related error codes
• Works with the oven's control system to help cycle heating elements or gas valve

• Disconnect power to the appliance before servicing to avoid shock hazard
• Handle the probe and its wiring gently; avoid sharp bends or pulling on connectors
• Verify connector orientation and secure connections to the control board per OEM diagram

This control panel lens cover protects the oven's display and touchpad area from spills, scratches and everyday wear while keeping the display visible and looking finished. It restores the appliance's appearance and helps prevent damage to the underlying controls. What it does

• Shields the display and control buttons from food splatter, grease and scratches.
• Keeps the display readable by reducing direct contact and surface damage.
• Replaces cracked, chipped or yellowed lens surfaces that obscure the control panel.
• Helps prevent moisture from directly contacting the control electronics when properly seated.

• One lens cover for the control panel.

• Disconnect power to the appliance before starting any work.
• Typically installs by removing the control panel trim or bezel; handle the lens by the edges to avoid fingerprints.
• Inspect mounting tabs or clips for damage and align carefully before snapping or fastening into place.
• If screws or additional trim are required, reuse OEM fasteners.

This thermal safety device automatically shuts off power to your oven when internal temperatures exceed safe limits. It acts as a backup safety system to prevent overheating and potential fire hazards. Replace this limiter if your oven won't heat at all or if it previously overheated beyond normal cooking temperatures.

Oven not heating properly or temperature way off? This temperature sensor probe accurately monitors cavity temperature for reliable cooking. Straightforward fix.

Selector switch module fixes appliances that won't change settings or cycles. Controls mode selection and operational functions. Direct replacement part.

If your oven won't brown or finish foods properly, the broil element may have failed. This upper heating element restores high-heat broiling performance.

Light socket for your range. Installs in the oven cavity or cooktop area to hold the interior light bulb. Replace if cracked, damaged, or no longer secure.