Gaggenau Range VG223112F Parts

This spark igniter switch mounts on the burner valve shaft and sends power to the spark module when you turn the knob, creating the clicking spark to light the burner. Replacing a worn switch restores dependable burner ignition.

• Activates the ignition circuit when the control knob is turned
• Common fix for a burner that doesn't click or spark
• Addresses intermittent sparking from a worn or contaminated switch
• Can resolve continuous clicking caused by a stuck/shorted switch after spills or moisture

• Disconnect power and shut off gas before servicing
• Remove the knob and top/panel as needed to access the valve area
• Note wire positions; transfer wires one at a time and align the switch on the valve shaft in the same orientation
• Reassemble and test burner ignition

This burner lid is the top cover for a slim two-piece gas cooktop burner, protecting the burner head and helping direct flame. It restores proper burner appearance and helps maintain even ignition and heat distribution. What it does

• Covers the burner head to protect internal parts from spills and debris
• Helps direct gas flow for a consistent flame pattern during cooking
• Can reduce ignition issues caused by food or liquid obstruction on the burner head
• Restores the cooktop's finished look where the original lid is cracked, warped, or missing

• One burner lid (slim 2-piece style)

• Turn off the appliance and gas supply (or unplug) before servicing; allow all parts to cool completely
• Lift off the existing lid and position the replacement so it seats securely on the burner base
• Do not force or overtighten—ensure proper alignment to avoid damaging the burner head

This is a foam sealing strip that creates an airtight seal between panels or the door area of the microwave. It helps prevent heat loss, air leaks, and moisture intrusion. Replace this strip if it appears compressed, crumbling, or if you notice gaps, rattling noises, or reduced heating efficiency.

This electrode is used in gas range burner ignition systems. It generates a spark to ignite the gas when the burner is turned on. Replace this part if the burner clicks but fails to light, produces weak or inconsistent sparks, or shows visible cracks or carbon buildup on the electrode tip.

This is a cutting disc used in range and oven assemblies. It serves as a component in the internal mechanism of the appliance. Replace this disc if it shows signs of wear, cracking, or damage that affects the operation of the associated assembly.

Bottom hinge for lawn tractor hood or deck assembly. Replace if hinge is bent, cracked, rusted, or no longer secures properly. Restores proper alignment.