Kenmore Range Hood 233.51303200 (23351303200, 233 51303200) Parts

This replacement switch restores dependable control in your Broan ventilation appliance. It opens and closes the electrical circuit for the fan or light, resolving issues like no response, sticking, or intermittent operation caused by worn contacts.

• Completes or breaks the circuit to control the fan motor and/or light
• Common symptoms: won't turn on or off, intermittent operation, needs wiggling, or a loose/stuck feel
• A failed switch can cause constant running, flickering, or no response
• Direct replacement to restore normal, reliable on/off control

• Disconnect power at the breaker before servicing
• Document wire positions; transfer wires one at a time or take a reference photo
• Ensure terminals are fully seated; avoid bending or overstressing connectors
• Restore power and test operation before final reassembly

The Speed Control is an OEM part for Broan range hoods. This component allows you to adjust the fan speed, providing the appropriate level of ventilation for various cooking activities. Proper speed control ensures efficient removal of smoke, odors, and excess heat from the kitchen environment.

Over time, the speed control can become faulty due to regular use, electrical issues, or physical damage to the control unit. A malfunctioning speed control can hinder the range hood's ability to ventilate effectively.

Symptoms of a bad speed control include:

• Inability to adjust fan speed
• Fan not turning on or off
• Intermittent operation of the fan
• Unresponsive speed settings

This OEM Broan part ensures your range hood operates efficiently, maintaining a pleasant kitchen environment.

A replacement push control button that restores user input on range hood controls for common wear, damage, or missing-buttons. Provides a straightforward, tactile interface to operate fan or light functions. What it does

• Replaces a cracked, worn, loose, or missing push button to restore normal control operation.
• Provides a tactile surface for engaging fan, light, or speed settings without touching internal switches.
• Helps stop accidental activations caused by broken or sticking buttons.
• Fits into the front control panel and actuates the underlying switch when pressed.

• Disconnect power to the appliance before beginning any service.
• Remove any filter or control panel trim needed to access the button; use basic hand tools as required.
• Press or snap the new button into place over the switch; verify secure fit and proper switch engagement.
• Reconnect power and test all relevant controls after installation.

This replacement receptacle is the electrical connector that secures a wiring harness to the appliance, restoring a reliable connection for power or control circuits. It provides a direct, like-for-like fix when the original connector is damaged or fails. What it does

• Connects wiring harness leads to the appliance control or motor/light circuit
• Restores power when a worn or broken connector causes intermittent or no operation
• Prevents loose or arcing connections from causing further electrical issues
• Matches OEM fit and function for a clean, secure connection

• One receptacle

• Always disconnect power to the appliance before inspecting or replacing electrical parts
• Verify terminal orientation and wiring color/location before removal to ensure correct reinstallation
• Use basic hand tools; secure connections firmly but avoid over-tightening that can damage terminals

This replacement switch controls power to a range hood function, restoring reliable on/off control so lights or fans respond correctly. Designed as a direct-fit service part when the original switch fails. What it does

• Opens and closes the electrical circuit to the hood's fan or light so the appliance turns on and off.
• Replaces a worn, stuck, or intermittently working switch that causes no power or erratic operation.
• Helps stop clicking, non-responsive buttons, or loss of a specific fan/light speed linked to a failed switch.
• Matches OEM fit and wiring locations for straightforward replacement in compatible hoods.

• One replacement switch.

• Disconnect power to the appliance at the breaker before starting any repair.
• Remove the hood's grille or access panel to reach the switch; retain screws and hardware.
• Note wire locations or take a photo before disconnecting wires; reconnect like-for-like.

This receptacle is the electrical connector used on compatible Broan ventilation appliances to restore a secure power connection. Replace a worn or damaged receptacle to help return reliable power to the fan and lights. What it does:

• Provides a secure electrical connection between the appliance wiring and its power/lighting circuits.
• Replaces damaged or corroded connectors that can cause intermittent power or failure to operate.
• Helps eliminate loose or arcing connections that may cause flickering lights or unreliable fan operation.
• Used where the original appliance connector has become brittle, melted, or otherwise compromised.

• Always disconnect household power at the breaker before starting service.
• Confirm the connector matches the appliance wiring and orientation before installing.
• Use proper tools and secure crimps/terminals; avoid exposed conductors.
• After installation, restore power and verify proper operation of fan and lights.

This replacement control switch operates the hood/ventilation fan functions so you can turn the unit on and off and select fan speeds. Restores reliable manual control when the original switch is worn, loose, or unresponsive. What it does:

• Replaces a failed or intermittent control switch to restore fan on/off and speed selection.
• Commonly used when the hood does not respond to button presses, clicks, or slips between positions.
• Provides a direct electrical connection for safe, low-voltage user control (matches OEM fit and function).
• Helps eliminate flickering lights or erratic fan behavior caused by a bad switch contact.

• 1 control switch

• Disconnect power at the breaker or unplug the appliance before starting any work.
• Handle wiring connectors carefully; match and seat all plug connections securely.
• If mounting hardware is stripped or damaged, replace it to ensure a secure fit.

This nut is a small fastener used to secure components on compatible Broan ventilation products, keeping parts tight and preventing movement. It's a straightforward replacement when a worn or missing nut causes loose fittings. What it does

• Secures mating parts (shafts, studs, or mounting hardware) to maintain assembly integrity
• Prevents vibration-related loosening that can cause rattling or misalignment
• Restores proper mechanical connection when a nut is stripped, corroded, or missing
• Helps ensure safe operation by keeping covers, brackets, or hardware attached

• One nut

• Disconnect power and follow appliance safety procedures before servicing
• Use the correct wrench or socket size and hand-start threads to avoid cross-threading
• Tighten to a snug fit; avoid overtightening which can strip threads or damage components
• Replace with the exact part number to ensure correct fit and function

This retaining nut secures components on ventilation and range hood assemblies to restore proper fit and reduce movement. A small but essential fastener used where vibration or threaded connections need a reliable hold. What it does

• Secures fan, grille or mounting hardware to threaded studs or bolts
• Keeps assemblies tight to prevent rattling or loosening over time
• Helps maintain correct alignment of venting components
• Prevents parts from separating during normal operation

• One retaining nut

• Disconnect power to the appliance before servicing electrical or moving parts
• Match thread size and type before installation; start by hand to avoid cross-threading
• Use the correct wrench/socket and tighten snugly without over-torquing
• Replace damaged or stripped nuts to ensure secure fastening

This is a genuine replacement screw used to secure internal parts and panels in Broan range hoods and ventilation products, restoring proper fit and stability. Fits where a factory fastener has stripped, broken, or gone missing. What it does

• Secures panels, brackets, or components to maintain proper alignment and reduce vibration
• Restores a solid mounting point when original hardware is damaged or lost
• Helps eliminate rattling or loose parts caused by missing or worn fasteners

• Use the correct driver to avoid stripping the head; match screw seating with the mating hole
• Tighten until snug—do not overtighten to prevent thread or part damage
• Disconnect power and take basic safety precautions before working on electrical appliances

This terminal is a replacement wire connector used to restore a secure electrical connection on compatible Broan range hood and ventilation assemblies. It provides a reliable contact point to help return power and signal continuity where the original terminal is damaged or corroded. What it does:

• Provides a secure connection point between appliance wiring and component terminals
• Replaces worn, loose, or corroded terminals that can cause intermittent power or component failure
• Helps stop arcing and poor contact that can lead to overheating at the connection
• Restores proper electrical continuity for controls, motors, or lights when the original terminal is faulty

• One replacement terminal

• Disconnect all power to the appliance before servicing to avoid shock or injury
• Verify terminal type and orientation match the original before installation
• Use proper crimping or fastening methods and ensure wires are securely seated
• If you see damaged wiring or insulation, replace or repair wiring per manufacturer guidance