Kenmore Range Hood 233.5168913 (2335168913, 233 5168913) Parts

Color: white.

Replacement rocker switch that restores manual control of the range-hood fan or light, providing straightforward on/off operation. Use this switch to replace worn, stuck, or non-responsive controls for safer, more reliable operation. What it does

• Replaces a failed or damaged rocker-style on/off control so the fan or light will operate when switched.
• Use when the hood fan or light won't turn on, the switch feels loose or sticks, or the control works intermittently.
• Fits into the original switch location and connects to existing wiring/quick-disconnect terminals.
• Restores simple user control without replacing the entire hood control assembly.

• One rocker switch.

• Always disconnect power at the breaker before servicing electrical components.
• Turn off power, label or photo the wiring for reference, then remove the old switch and attach the replacement to matching terminals.
• Secure the switch and restore power; test fan and light operation.

This switch assembly restores dependable control of your range hood or ventilation unit, helping resolve unresponsive or intermittent controls so the appliance turns on, off, and changes settings as expected.

• Provides the user interface to turn functions on/off and change settings
• Failure signs include no response on certain settings, intermittent operation, or a stuck/loose actuator
• Heat, moisture, and normal wear can degrade internal switch contacts over time
• Replacing the switch restores smooth, consistent operation

• Disconnect power at the breaker before servicing
• Access the control area and photograph wiring to document positions
• Move wires one at a time to the new switch; ensure tight, fully seated connections
• Reassemble and test all functions before finalizing

This replacement fan blade restores airflow in hood and ventilation blowers by moving air through the fan assembly. Use it to replace cracked, bent, or worn blades and help reduce vibration and noisy operation. What it does:

• Spins on the blower motor to generate airflow for ventilation and exhaust.
• Replaces blades that are cracked, bent, or visibly damaged and causing reduced airflow.
• Can reduce unusual noise and vibration caused by an imbalanced or broken blade.
• Helps restore proper vent performance when airflow is weak or inconsistent.

• Disconnect power to the appliance before starting any service.
• Remove the blower housing or access panel to reach the blade; follow OEM instructions.
• Keep fasteners and spacers in order during disassembly; reassemble with original hardware unless replacements are specified.
• If vibration or noise persists after replacing the blade, inspect motor bearings, mountings, and blower housing for damage.

This retainer is a small mounting clip used in Broan ventilation hoods to hold trim, lenses, or small assemblies securely in place. Replacing a worn or broken retainer restores stable mounting and reduces vibration or rattling. What it does:

• Secures trim pieces, light lenses, or small assemblies so they stay aligned and seated
• Prevents parts from shifting or vibrating during operation
• Helps stop rattling or loose components around the hood opening
• Keeps replaceable covers and lenses from falling out when installed correctly

• Disconnect power to the appliance or turn the circuit breaker off before working on the hood
• Use common hand tools as needed; handle sharp sheet-metal edges with gloves
• Verify this retainer matches the damaged piece before installation

This socket is the lamp holder designed to secure and connect a light bulb to the appliance, restoring reliable illumination. It provides the physical and electrical connection needed for compatible appliance lamps. What it does:

• Holds the light bulb securely and provides the electrical contacts for operation
• Restores lighting when a damaged or worn socket causes flickering or no light
• Compatible with standard appliance lamp replacements that match the original socket type
• Helps maintain proper bulb alignment for reflectors and filters to work as intended

• Disconnect power to the appliance before beginning any work to avoid electrical shock
• Inspect wiring and connectors for damage; replace if frayed or corroded
• Reinstall bulb and any removed trim or housing panels securely before restoring power

This factory replacement cover fits select Broan ventilation units. It replaces a cracked, damaged, or missing cover to protect internal components, restore a clean finished appearance, and help maintain proper airflow and performance.

• Shields internal wiring, fan, or control components from debris and accidental contact
• Helps direct airflow through the housing for consistent operation
• Restores a secure fit if the original cover is cracked, warped, or broken
• Common symptoms include rattling/vibration, poor fit, exposed parts, or a loose/missing cover

• Disconnect power to the unit before servicing
• Support the cover and remove retaining screws or release tabs; note orientation for reassembly
• Transfer any clips, grommets, or seals from the old cover if applicable
• Reinstall securely without overtightening; verify clearance and operation before restoring power

This name plate is the small identification label that mounts to the appliance to display model and serial information. It restores a legible ID label so you can easily identify the unit for service or parts ordering. What it does:

• Replaces a missing, worn or damaged identification label
• Provides visible model/serial and manufacturing information for repairs
• Restores the appliance's factory identification for resale or inspection

• Clean and dry the mounting surface before installing for best adhesion
• Peel backing or attach with the existing fasteners, aligning carefully to avoid wrinkles
• If the old label is stuck, remove it gently with a plastic scraper and an appropriate adhesive remover
• Always disconnect power to the appliance before performing any service that requires access to internal panels

This small wire clip secures wiring and harnesses to the appliance frame to prevent rubbing, disconnection, or contact with moving or hot parts. It helps keep wires routed neatly for reliable operation and safer service. What it does:

• Holds individual wires or small wiring bundles in place to prevent chafing and strain
• Keeps wiring away from sharp edges, ventilation openings, and moving components
• Reduces the chance of loose connectors and intermittent electrical issues
• Useful during reassembly after repairs or panel removal

• One wire clip

• Disconnect power to the appliance before inspecting or working on wiring
• Remove panels or covers as needed to access mounting location; a small screwdriver or needle-nose pliers may be helpful
• Install by seating the clip on the frame or post and snapping the wire(s) into the retainer; ensure a secure fit without pinching insulation
• If routing differs from the original, wires are kept clear of heat sources and moving parts before restoring power