Kenmore Range Hood 233.52052002 (23352052002, 233 52052002) Parts

The Light Lens is an OEM part for Broan ventilation hoods, playing a role in diffusing light evenly across the cooking area. The light lens covers the light bulb, protecting it from grease and other cooking byproducts while ensuring the light is distributed effectively.

The causes of these issues often stem from the harsh kitchen environment, including exposure to high temperatures, grease, and accidental impacts. Over time, these factors can degrade the clarity and integrity of the light lens, affecting its performance and appearance.

Symptoms of a failing Light Lens include:

• Cracks or breaks in the lens, which can lead to uneven lighting or expose the bulb to damage
• Discoloration or cloudiness, reducing the effectiveness of the light distribution
• Missing or loose lens, which can significantly decrease visibility in the cooking area

The Damper is an OEM part for Broan range hoods. It is designed to regulate airflow, preventing backdrafts and ensuring efficient ventilation by allowing air to flow out while blocking external air from entering.

Causes of a bad damper can include accumulation of grease or debris, damage from cleaning or impact, or wear and tear over time. A malfunctioning damper can lead to poor ventilation and compromised kitchen air quality.

Symptoms of a bad Damper include:

• Reduced airflow or ventilation efficiency
• Unusual noises from the range hood
• Odors lingering in the kitchen
• Air drafts entering through the range hood

This OEM Broan part is designed for optimal performance, helping maintain a clean and well-ventilated kitchen environment.

Replacement carbon (charcoal) filter that helps reduce cooking odors when your range hood is set to recirculate instead of venting outside. Restores odor-capture performance for non-vented installations and keeps kitchen air fresher. What it does:

• Adsorbs and reduces common cooking odors produced during frying, grilling, and sautéing
• Intended for use in recirculating/ductless hood configurations where air is returned to the kitchen
• Replaces a worn or saturated carbon/charcoal filter that no longer controls smells
• Symptom link: persistent or increased kitchen odors when the hood fan is running

• Turn off power to the hood and follow the owner's manual before servicing
• Access the filter housing per the hood model instructions, remove the old filter, and install the new one in the same orientation
• Dispose of the used filter according to local regulations; do not attempt to wash or regenerate disposable carbon filters

This factory replacement plate provides a rigid, stable mounting surface inside your unit. Replacing a bent or damaged plate helps keep internal components securely positioned and operating smoothly.

• Supports and locates attached components for correct fit and function
• Helps maintain alignment to reduce rubbing, vibration, or rattling noises
• Restores secure mounting when the original plate is bent, cracked, or missing
• Direct-fit replacement built to match the original footprint

• Disconnect power at the breaker before servicing
• Wear cut-resistant gloves; metal edges can be sharp
• Support attached parts and transfer any brackets or hardware from the old plate
• Tighten fasteners evenly before restoring power

This is a replacement light socket that restores a safe, reliable electrical connection for your appliance's lamp. Replacing a worn or heat-damaged socket can stop flickering or non-working lights and keep your ventilation unit illuminated. What it does:

• Holds the lamp securely and provides electrical contact
• Can help when the light won't turn on even with a known-good bulb
• Addresses intermittent flicker from loose or oxidized contacts
• Replaces sockets that are cracked, melted, or visibly discolored

• One light socket

• Disconnect power at the circuit breaker and verify power is off before servicing
• Remove the lens/cover and lamp to access the socket
• Note wire routing/orientation and transfer connections one at a time to the new socket
• Use only the bulb type and wattage specified for your model; test before reassembly

Replacement service light switch that restores the on/off control for a Broan ventilation or range-hood light. Use this switch to replace a worn, stuck, or non-functioning light control so the light operates reliably. What it does:

• Replaces the unit's user-control for the light circuit, restoring normal on/off operation.
• Fixes common symptoms such as the light not turning on, intermittent lighting, or a switch that feels loose, stuck, or unresponsive.
• Matches the original switch location and wiring style to simplify replacement and restore functionality.

• Always disconnect power to the appliance at the breaker before starting work.
• Removal typically requires taking off the light cover or access panel to reach the switch; keep screws and small parts for reassembly.
• Match wire colors/terminals when reconnecting; use proper connectors and secure wiring.

This replacement fan blade restores airflow in compatible Broan ventilation hoods and exhaust fans, helping reduce noise and improve ventilation performance. Designed to match the original fit and balance for reliable operation. What it does:

• Replaces a bent, cracked, or missing exhaust fan blade to restore proper airflow
• Helps stop rattling, vibration, or scraping noises caused by damaged blades
• Restores balanced rotation to reduce motor strain and improve venting
• Suitable for use in range-hood and bathroom exhaust blower assemblies where this blade is specified

• One (1) fan blade

• Turn off power to the appliance at the breaker before servicing
• Verify blade orientation and secure mounting per the original hardware
• Inspect shaft and housing for damage; replace motor or fasteners if worn

This rocker on/off switch replaces a failed control switch to restore power control for the appliance's fan or light. It provides a direct user control point for starting and stopping motorized or lighting functions. What it does

• Opens and closes the electrical circuit to turn the fan or light on and off.
• Replaces a switch that is stuck, unresponsive, or intermittently working.
• Fixes symptoms such as no power to fan or light, or loss of control at the panel.
• Restores manual control when the original switch has worn contacts or mechanical failure.

• One rocker on/off switch.

• Disconnect power to the appliance at the breaker or unplug before starting.
• Remove the unit's access panel to reach the switch and note wiring locations or take a photo before disconnecting.
• Swap the old switch for the new one, reconnect wires to the same terminals, and secure the switch and panel.
• Test operation after reinstalling panels.