Kenmore Microwave 721.68211890 (72168211890, 721 68211890) Parts

The Magnetron is an OEM part for LG microwaves. It is responsible for generating the microwaves that cook or heat the food inside the appliance. The magnetron converts electrical energy into microwave radiation, ensuring efficient and even heating.

Causes of a bad magnetron can include prolonged use, electrical surges, or overheating. Over time, these factors can lead to the magnetron wearing out or failing completely.

Symptoms of a bad Magnetron include:

• The microwave not heating food
• Strange noises during operation
• Burning smell or smoke
• The microwave shutting off unexpectedly

This OEM LG part is also compatible with Sears/Kenmore models.

This rivet assembly fastens panels, brackets, or covers inside the microwave cabinet. Replacing a damaged or missing fastener restores a tight fit, reduces vibration noise, and keeps mounted components properly aligned.

• Secures panels, brackets, or covers to the cabinet for a stable fit
• Use when a rivet is cracked, missing, or no longer holds
• Can help resolve rattling, buzzing, or loose panel movement
• Maintains proper alignment and support of mounted parts

• Disconnect power before servicing; support and remove over-the-range/built-in units for safe access.
• Microwaves contain a high-voltage capacitor that can retain a dangerous charge—service should be performed by qualified personnel.
• Reinstall using existing mounting holes; ensure the rivet is fully seated and secure.
• Wear cut-resistant gloves and eye protection to avoid injury from sharp metal edges.

This holder assembly secures and guides the door latch components so the door closes firmly and the safety interlock switches engage. Replacing a worn holder restores reliable latching and helps the unit start consistently.

• Supports and aligns the latch mechanism within the door
• Ensures door hooks engage the interlock switches for safe operation
• Helps prevent a door that won't latch or pops open
• Common symptoms: unit won't start or shows a door error unless you press on the door

• Disconnect power at the breaker before service; microwaves contain high voltage even when unplugged
• Remove the door, separate the inner/outer panels, and transfer the latch holder
• Reassemble carefully, verifying smooth latch movement and proper door alignment
• Test door closure and operation before returning to service

This door latch assembly engages the interlock switches when the microwave door closes, keeping the door securely shut. Replacing a worn latch restores safe door engagement and allows the oven to operate only when properly closed.

• Hooks into the cabinet strike to hold the door closed
• Actuates the interlock switches to permit heating
• Helps resolve: door won't latch or stay shut, "Door/Open" error messages, unit won't start unless the door is pressed
• Replaces a visibly cracked, worn, or broken latch

• Unplug the microwave before servicing; microwaves contain high-voltage components—work only on the door, not inside the cabinet
• Remove the inner door trim to access the latch; note orientation and transfer any clips/hardware as found
• Inspect the door strike and hinges for wear; misalignment can prevent proper latching
• After reassembly, verify smooth door closure and that the oven will not run with the door open

This truss head tapping screw secures panels, brackets, and covers in your appliance. Replacing a missing or damaged fastener restores a snug fit, reduces vibration, and helps keep components properly aligned for reliable performance.

• Provides low-profile holding power; wide truss head helps secure thin panels and trim
• Replaces lost, stripped, or corroded screws at the original mounting points
• Helps eliminate rattling, vibration, or loose handles/covers
• Addresses situations where a screw will not tighten or backs out during use

• Disconnect power; shut off water/gas if applicable before servicing
• Align parts and hand-start threads to avoid cross-threading
• Tighten until snug; do not overtighten to prevent stripping
• If the receiving hole is damaged, for repair before installing the new screw

This is a truss-head tapping screw used to secure trim, panels, and small assemblies on compatible LG appliances. It provides a low-profile, wide-bearing head that helps hold parts flush and resist pull-through. What it does:

• Fastens plastic and sheet-metal components where a self-tapping thread is needed
• Truss head spreads load to prevent damage to soft or thin materials
• Helps secure control panels, brackets, or trim pieces that require a low-profile head
• Common replacement when original mounting screws are missing, stripped, or corroded

• One truss-head tapping screw

• Use the correct screwdriver bit and moderate torque to avoid stripping the screw or workpiece
• Start threading straight and let the screw form threads without forcing at an angle
• Disconnect power and follow appliance-specific service safety procedures before working internally
• Replace any damaged mating threads or clips for a secure fit

This is a replacement screw used to secure appliance components and panels. It restores proper fastening where a stripped, missing, or damaged screw causes loose parts or rattling. What it does:

• Fastens panels, trim, or internal components to maintain structural fit
• Helps stop vibration-related noise from loose assemblies
• Replaces missing or corroded screws that prevent proper closures
• Restores secure mounting after repairs or disassembly

• Use the correct screwdriver or bit to avoid stripping the head
• Tighten until snug—do not over-torque to prevent thread damage
• Keep small parts away from children and pets
• Disconnect power or water before accessing internal parts

This door release lever links the microwave's push-button to the latch mechanism so the door unlatches and opens smoothly. Replacing a worn or broken lever restores consistent, reliable button-operated door opening. What it does

• Transfers motion from the door open button to the latch hooks to release the door
• Helps ensure smooth, consistent door opening with each press
• Common symptoms: door won't open when pressing the button, button feels loose or sticks, intermittent opening, or broken plastic fragments near the button area

• 1 door release lever

• Disconnect power before servicing; microwaves contain high-voltage components
• If over-the-range, support or remove the unit to access internal components safely
• Remove the outer cover/control panel to reach the latch area; note lever orientation before removal
• After reassembly, verify the button action and door opening/closing before restoring power

A Tap-Tite binding-head screw used to fasten appliance panels and components where a self-tapping metal thread is required. Replaces missing or damaged fasteners to restore secure assembly and reduce vibration or rattling. What it does:

• Creates its own mating thread in thin sheet metal for a secure hold without a nut.
• Holds panels, brackets, and trim in place to prevent looseness or movement.
• Commonly used where stripped, missing, or broken screws cause rattling, misalignment, or parts that won't stay attached.
• Compatible with standard screwdrivers or nut drivers sized to the binding-head.

• Disconnect power and unplug the appliance before working on it.
• Use the correct driver bit to avoid cam-out or head damage.
• Start straight and apply steady pressure; avoid overtightening to prevent stripping the formed threads.
• If the original hole is badly damaged, assess for repair or use of a larger fastener as needed.

This thermostat controls refrigerator temperature to help maintain proper cooling and prevent spoilage. It replaces a failed or inaccurate temperature control to restore consistent operation. What it does:

• Senses internal temperature and signals the compressor to cycle on/off
• Helps keep food at steady, safe temperatures when functioning correctly
• Commonly replaces thermostats that cause warm temperatures or inconsistent cooling
• Works as a direct replacement when matching the OEM part number

• Always disconnect power to the appliance before servicing to avoid shock or injury
• Handle the sensor and terminals carefully; avoid bending or damaging components
• Basic hand tools are typically required; follow your model's service manual for exact instructions