Bosch Range PRI30LBHU Parts

Fix a range that won't reach set temperature or shows temperature error codes. This sensor monitors oven heat and signals the control board to adjust.

Mounting screw secures burner components and panels on gas ranges. Replace if stripped, corroded, or broken to restore proper alignment and fit.

This OEM replacement part is a motor assembly for ovens. The motor assembly is the main motor that powers the oven fan which is responsible for maintaining and adjusting the temperature in an oven. If the oven is no longer heating properly, turning on, or maintaining temperature, then the motor assembly will need to be replaced.To replace this part, make sure that the oven is unplugged. After it has been powered off, proceed to pull the oven out and away from the wall. Once moved, uninstall the back panel of the oven by removing the panel's mounting screws. After detaching the back panel, locate the motor housing on the back of the oven. Unthread the screws that hold the housing in place. Once removed, locate the mounting brackets that hold the motor in place and remove the screws that attach to the motor. Pull the old motor out of its place and install the new motor. Reinstall the back panel and restore power to the appliance.This genuine replacement part is sold individually and is compatible with Bosch, Gaggenau, and Thermador brand ovens.

This high-limit thermostat is a safety device that monitors the oven's internal temperature and cuts power to the heating element if the temperature exceeds a safe threshold. It helps prevent overheating and potential fire hazards. Replace this part if your oven shuts off unexpectedly, fails to heat at all, or triggers error codes related to excessive temperature.

Fix an oven light that won't turn on or a self-clean cycle that won't start. This door switch monitors door position for safety and lighting.

This is a telescopic sliding rack designed for a 30-inch built-in oven. It mounts on the interior side rails and allows smooth, extendable access to heavy dishes for easier loading and unloading. Replace this rack if the slides are bent, the rack no longer glides smoothly, or if the shelf is warped and sits unevenly.

The Control Module is an OEM component specifically designed for Bosch dishwashers. It coordinates all electrical functions and directs the operation of the various mechanisms. Working closely with the user interface and other electrical parts, the control module ensures each cycle runs precisely as programmed. 

Symptoms of a bad control module include:

• Dishwasher not starting or randomly stopping mid-cycle  
• Error codes appear frequently
• Inability to select desired cycles or options
• The lights on control panel/display not illuminating properly
• Unresponsive or unpredictable behavior

Causes of a bad control module can be related to water intrusion into the electrical components, failure over time due to continuous usage, or damage due to power surges. 

This Bosch control module replacement part is compatible with some Siemens, Thermador, Gaggenau, and select Kenmore models as well. Replacing the control module restores full operational functionality to the dishwasher.

Appliance overheating or not heating properly? This thermal cutoff temperature limiter opens the circuit at unsafe temperatures to protect your unit.

Oven light not working or flickering? This low-voltage transformer powers your range's interior lights. Restores proper oven lighting function.

This circular heating element is mounted around the convection fan at the rear wall of the oven cavity. It provides the heat that the fan circulates evenly throughout the oven during convection cooking. Replace this element if the oven does not heat properly in convection mode, heats unevenly, or if the element shows visible damage such as blistering, cracks, or burn-through spots.

If your range isn't heating to the correct temperature or runs too hot or cold, the temperature sensor may have failed. This part monitors oven heat levels.

Replacement leveling foot that supports and stabilizes your appliance base. Install this foot to replace a cracked, worn, or missing support leg.

Oven lamp assembly provides interior lighting for viewing food during cooking. Replace when bulb burns out or housing cracks. Verify fit with your model.

This evaporator fan motor circulates cold air through the refrigerator compartment to help maintain even temperatures and efficient cooling. Replacing a failing motor restores airflow and reduces temperature fluctuations. What it does:

• Spins the evaporator fan blade to move cold air from the freezer section into the fridge
• Helps prevent uneven cooling and warm spots in refrigerated compartments
• Common symptom: fridge runs but temperature is too warm or inconsistent
• Other symptom: loud or unusual noise coming from the freezer or back of the unit
• Also causes frost buildup on the evaporator if airflow is poor

• Disconnect power to the appliance before beginning any repair
• Access typically requires removing interior panels or the freezer rear panel; keep fasteners organized
• Handle the motor and wiring carefully; match connector orientation when reinstalling
• After installation, restore power and verify correct fan rotation and normal operating noise

This fan motor powers the appliance's blower to move air where it's needed, helping maintain proper airflow for cooling, heating or drying so your appliance runs efficiently and preserves performance. What it does:

• Spins the blower or fan assembly to circulate air through the appliance
• Supports proper temperature regulation and component cooling
• Helps with moisture removal and more consistent cycles when air movement is required
• Failure can cause weak airflow, increased temperatures, longer cycles, or unusual noise

• Disconnect power before accessing internal components to avoid shock risk
• Handle the motor and wiring harness carefully; inspect connectors for damage before reassembly
• Mount and align the fan per the appliance's service instructions to prevent rubbing or vibration

Small hardware pin that secures or pivots components in gas ranges and cooktops. Replace if worn, missing, or broken to restore proper alignment.