Gaggenau Range EB388210 Parts

This Halogen Bulb is an OEM part for Bosch Ranges. It provides illumination for the range's interior. Continuous use or high temperatures can cause the bulb to burn out or fail.

What Causes a Bad Halogen Bulb: 
Repeated heating and cooling cycles, along with continuous use, can cause the halogen bulb to burn out or break.

Symptoms of a Bad Halogen Bulb:

• The bulb is not lighting up
• Visible signs of damage or a broken filament
• Flickering or intermittent lighting

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This door hinge provides the pivot point that lets the appliance door open smoothly and close flush. Replacing a worn or bent hinge restores proper alignment and sealing for safe, reliable door operation.

• Provides the pivot point that guides door opening and closing
• Helps keep the door square to the cabinet for a consistent seal
• Wear or damage can cause sagging, binding, gaps, or a door that won't close flush
• Restores smooth movement and proper door alignment

• Disconnect power before servicing; also shut off gas or water
• Support the door during removal to prevent damage or injury
• Transfer any mounting screws/brackets from the old hinge to the new one
• After installation, verify door alignment and gasket contact; adjust as needed

This is a sealing gasket designed to create an airtight fit on an oven or range component such as a door or lamp glass assembly. It prevents heat from escaping and protects internal parts from moisture and debris. Replace this seal if you notice heat leaking from the oven, uneven cooking temperatures, or visible wear and cracking on the existing gasket.

This oven temperature probe is the internal sensor that monitors cooking cavity temperature so the oven control can regulate heat for accurate cooking and bake results. It's a direct-replacement sensing probe for compatible Bosch ovens. What it does:

• Measures internal oven temperature and sends readings to the control board
• Allows the oven to maintain set temperatures for consistent cooking
• Common symptoms of a failing probe: inaccurate oven temps, oven not reaching set temperature, or temperature-related error codes
• Works with the oven's control system to help cycle heating elements or gas valve

• Disconnect power to the appliance before servicing to avoid shock hazard
• Handle the probe and its wiring gently; avoid sharp bends or pulling on connectors
• Verify connector orientation and secure connections to the control board per OEM diagram

This is a glass panel that serves as part of the control panel area on a range or oven, covering and protecting the controls while allowing visibility of indicators and displays. It provides a smooth, finished surface on the front of the appliance. Replace this panel if it is cracked, chipped, shattered, or if the surface has become cloudy or damaged from heat exposure.

Control module not responding or cycles won't start? This electronic control board restores cycle control and user-interface functions. Moderate DIY repair.

Replace a bent, warped, or missing oven rack. This wire shelf installs inside your oven to provide stable support for cookware and bakeware at the correct height.

This is a flexible sealing strip that fits along the oven door to create an airtight seal when the door is closed. It prevents heat from escaping during cooking and helps the oven maintain consistent temperatures. Replace this strip if you notice heat leaking around the door, uneven cooking, or if the seal appears cracked, hardened, or deformed.

Oven not heating properly or temperature way off? This temperature sensor probe accurately monitors cavity temperature for reliable cooking. Straightforward fix.

This halogen bulb socket connects and secures the oven light bulb so the interior light works reliably when the door is opened or the light switch is used. Replaces a worn or damaged socket to restore a solid electrical connection. What it does:

• Holds the halogen oven light bulb in place and provides the electrical contacts to power the lamp
• Commonly used when the oven light flickers, won't turn on, or the bulb becomes loose
• Maintains correct alignment and insulation for safe bulb operation
• Designed for direct replacement of the original socket in compatible ovens

• Disconnect power to the appliance before starting any repair to avoid electric shock
• Allow the oven and bulb to cool completely before touching components
• Handle halogen bulbs with a clean cloth or gloves; oils from skin can shorten bulb life

This is a door-actuated switch used in an oven or range to detect whether the door is open or closed. It signals the control board to enable or disable certain functions such as the oven light or self-clean lock mechanism. Replace this switch if the oven light stays on or off regardless of door position, or if the appliance does not recognize when the door is opened or closed.

Light socket for your range. Installs in the oven cavity or cooktop area to hold the interior light bulb. Replace if cracked, damaged, or no longer secure.

This is a temperature limiter (thermoprotector) that acts as a safety device inside a microwave. It monitors internal temperatures and cuts power to the heating components if the appliance overheats, preventing damage or fire. Replace this part if the microwave shuts off unexpectedly during use, fails to heat, or if testing shows the limiter has tripped and no longer resets.