Kenmore Range Hood 233.57839890 (23357839890, 233 57839890) Parts

The Speed Control is an OEM part for Broan range hoods. This component allows you to adjust the fan speed, providing the appropriate level of ventilation for various cooking activities. Proper speed control ensures efficient removal of smoke, odors, and excess heat from the kitchen environment.

Over time, the speed control can become faulty due to regular use, electrical issues, or physical damage to the control unit. A malfunctioning speed control can hinder the range hood's ability to ventilate effectively.

Symptoms of a bad speed control include:

• Inability to adjust fan speed
• Fan not turning on or off
• Intermittent operation of the fan
• Unresponsive speed settings

This OEM Broan part ensures your range hood operates efficiently, maintaining a pleasant kitchen environment.

This direct-drive hood blower motor powers the ventilation fan to move cooking fumes and moisture out of the kitchen, restoring proper airflow and reducing smoke and odors. It's a factory-style replacement designed for compatible Broan range hoods. What it does:

• Spins the hood blower to exhaust smoke, steam, and odors from the cooktop area
• Restores weak or intermittent fan operation when the motor fails
• Helps eliminate loud grinding, humming, or no-spin symptoms caused by a bad motor
• Works with the hood's existing blower assembly and fan wheel when compatible

• Disconnect power to the appliance before starting; verify with a multimeter.
• Handle the motor carefully to avoid damaging the shaft or wiring harness.
• Transfer the fan wheel or mounting hardware as needed.

This replacement switch restores dependable control in your Broan ventilation appliance. It opens and closes the electrical circuit for the fan or light, resolving issues like no response, sticking, or intermittent operation caused by worn contacts.

• Completes or breaks the circuit to control the fan motor and/or light
• Common symptoms: won't turn on or off, intermittent operation, needs wiggling, or a loose/stuck feel
• A failed switch can cause constant running, flickering, or no response
• Direct replacement to restore normal, reliable on/off control

• Disconnect power at the breaker before servicing
• Document wire positions; transfer wires one at a time or take a reference photo
• Ensure terminals are fully seated; avoid bending or overstressing connectors
• Restore power and test operation before final reassembly

This replacement recirculating vent filter helps capture airborne particles and reduce cooking odors in range hood recirculation setups, keeping exhaust air cleaner and helping maintain ventilation performance. What it does:

• Captures grease and airborne particles that accumulate during cooking
• Helps reduce common cooking odors when used in recirculating mode
• Protects internal blower and ductwork from heavy buildup
• Supports consistent airflow and ventilation performance when clean

• One replacement recirculating vent filter

• Replace with the unit powered off and controls set to OFF; disconnect power if required for your model
• Slide or snap into the filter housing following the range hood's filter access method
• Inspect surrounding clips and seals; replace if damaged to ensure proper fit
• Check and replace regularly per the range hood manufacturer's maintenance recommendations

A replacement push control button that restores user input on range hood controls for common wear, damage, or missing-buttons. Provides a straightforward, tactile interface to operate fan or light functions. What it does

• Replaces a cracked, worn, loose, or missing push button to restore normal control operation.
• Provides a tactile surface for engaging fan, light, or speed settings without touching internal switches.
• Helps stop accidental activations caused by broken or sticking buttons.
• Fits into the front control panel and actuates the underlying switch when pressed.

• Disconnect power to the appliance before beginning any service.
• Remove any filter or control panel trim needed to access the button; use basic hand tools as required.
• Press or snap the new button into place over the switch; verify secure fit and proper switch engagement.
• Reconnect power and test all relevant controls after installation.

This replacement receptacle is the electrical connector that secures a wiring harness to the appliance, restoring a reliable connection for power or control circuits. It provides a direct, like-for-like fix when the original connector is damaged or fails. What it does

• Connects wiring harness leads to the appliance control or motor/light circuit
• Restores power when a worn or broken connector causes intermittent or no operation
• Prevents loose or arcing connections from causing further electrical issues
• Matches OEM fit and function for a clean, secure connection

• One receptacle

• Always disconnect power to the appliance before inspecting or replacing electrical parts
• Verify terminal orientation and wiring color/location before removal to ensure correct reinstallation
• Use basic hand tools; secure connections firmly but avoid over-tightening that can damage terminals

This rubber grommet cushions and isolates blower or hood components to reduce vibration and noise for smoother operation. It replaces worn or torn mounts that allow metal-to-metal contact and rattling. What it does:

• Cushions motor or housing mounts to absorb vibration and reduce operational noise
• Prevents metal-to-metal contact that can cause wear or rattling
• Restores secure fit where a damaged grommet allowed looseness or movement
• Commonly replaced when torn, cracked, or missing

• One rubber grommet

• Always disconnect power to the appliance before servicing
• Inspect surrounding mounting hardware and replace any damaged fasteners
• Push-fit into mounting hole or seat on shaft per OEM orientation; may require light leverage with a non-marring tool

This replacement switch controls power to a range hood function, restoring reliable on/off control so lights or fans respond correctly. Designed as a direct-fit service part when the original switch fails. What it does

• Opens and closes the electrical circuit to the hood's fan or light so the appliance turns on and off.
• Replaces a worn, stuck, or intermittently working switch that causes no power or erratic operation.
• Helps stop clicking, non-responsive buttons, or loss of a specific fan/light speed linked to a failed switch.
• Matches OEM fit and wiring locations for straightforward replacement in compatible hoods.

• One replacement switch.

• Disconnect power to the appliance at the breaker before starting any repair.
• Remove the hood's grille or access panel to reach the switch; retain screws and hardware.
• Note wire locations or take a photo before disconnecting wires; reconnect like-for-like.

This receptacle is the electrical connector used on compatible Broan ventilation appliances to restore a secure power connection. Replace a worn or damaged receptacle to help return reliable power to the fan and lights. What it does:

• Provides a secure electrical connection between the appliance wiring and its power/lighting circuits.
• Replaces damaged or corroded connectors that can cause intermittent power or failure to operate.
• Helps eliminate loose or arcing connections that may cause flickering lights or unreliable fan operation.
• Used where the original appliance connector has become brittle, melted, or otherwise compromised.

• Always disconnect household power at the breaker before starting service.
• Confirm the connector matches the appliance wiring and orientation before installing.
• Use proper tools and secure crimps/terminals; avoid exposed conductors.
• After installation, restore power and verify proper operation of fan and lights.

This blower motor replaces the ventilation fan that moves air through a range or wall hood, restoring extraction and reducing odors and smoke. Designed for compatible Broan ventilation units. What it does:

• Spins the fan/blower wheel to exhaust cooking smoke, steam and airborne grease
• Restores airflow when the original motor hums, fails to start, or provides weak suction
• Helps reduce overheating by maintaining proper ventilation
• Matches the OEM mounting and electrical connection on compatible Broan hoods when listed

• Disconnect power to the appliance at the breaker before starting any work.
• Verify the motor shaft rotation and mounting orientation match the existing unit before final assembly.
• Use appropriate fasteners and wiring connectors; follow the appliance wiring diagram.

This deflector directs exhaust airflow and helps protect the hood's internal blower and components from grease and debris. It restores proper venting and helps maintain quieter, more efficient operation when functioning correctly. What it does:

• Guides exhaust air through the hood's vent path to improve airflow direction.
• Shields the blower assembly from grease, lint, and debris that can reduce performance.
• Helps reduce abnormal airflow noise or vibration caused by displaced or missing baffles.
• Can prevent premature buildup that leads to diminished exhaust effectiveness.

• Disconnect power to the appliance before starting work to avoid injury.
• Typically installs with a few screws or clips; verify correct orientation before fastening.
• Inspect surrounding seals and fasteners and replace any damaged hardware for a secure fit.

This replacement control switch operates the hood/ventilation fan functions so you can turn the unit on and off and select fan speeds. Restores reliable manual control when the original switch is worn, loose, or unresponsive. What it does:

• Replaces a failed or intermittent control switch to restore fan on/off and speed selection.
• Commonly used when the hood does not respond to button presses, clicks, or slips between positions.
• Provides a direct electrical connection for safe, low-voltage user control (matches OEM fit and function).
• Helps eliminate flickering lights or erratic fan behavior caused by a bad switch contact.

• 1 control switch

• Disconnect power at the breaker or unplug the appliance before starting any work.
• Handle wiring connectors carefully; match and seat all plug connections securely.
• If mounting hardware is stripped or damaged, replace it to ensure a secure fit.