Kenmore Range 362.70250605 (36270250605, 362 70250605) Parts
Genuine Ge part
By: Ge
Part Number: WB35X29720
Seals your oven door to retain heat and maintain proper cooking temperature. Replace if torn, brittle, or heat escapes. Clips into place in minutes.
Do-It-Yourself Stories from Customers like You
Oven gasket was loose on one side(gasket torn around clips) Nathan E. • Cheboygan , MI • May 09, 2015
Ordered New Gasket and installed in about 3-4 Minutes. Only need small pliers to remove some of old clips from holes. New Gasket clipped in easily by hand.
Read more
More
Genuine Ge part
By: Ge
Part Number: WB48T10095
Replacement oven rack for electric and gas ranges. Installs inside oven cavity. Needed when original rack is missing, damaged, or warped from use.
Do-It-Yourself Stories from Customers like You
Stove was missing rack Jack S. • Cloverdale , CA • December 30, 2014
Orded rack by stove model number. fit perfect
Read more
More
Genuine Ge part
By: Ge
Part Number: WB16K10026
The Double Burner Kit is an OEM part for GE gas ranges. This kit includes the necessary components to replace the double burner, which is crucial for efficient cooking on GE gas stoves. The double burner provides two separate flame sources, allowing for versatile cooking options with different heat levels.
Causes of a bad double burner can include normal wear and tear, clogs from food debris, exposure to high temperatures, or physical damage. These issues can hinder the burner's performance and safety.
Symptoms of a bad double burner include:
- Uneven or weak flames
- One or both burners not igniting
- Difficulty in adjusting the flame size
- Noticeable gas odor when the burner is off
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Dirty burner assemblies and worn and flakig burner grates Yvonne R. • Fernley , NV • March 11, 2015
Purchased new burner assemblies and burner grates from Appliance Parts Pros to replace old, worn out ones. This job was easy as all parts purchased were unpack and place. My range is about 15 years old but is in pristine condition so instead of replacing the range, I chose to replace dirty, worn parts.
Read more
More
Genuine Ge part
By: Ge
Part Number: WB1X1293
Secures the igniter to the burner assembly in gas ranges and ovens. Replace if stripped, missing, or damaged during igniter replacement or repair.
Do-It-Yourself Stories from Customers like You
Failure to hold temperature after preheating. Michael D. • Wilmington , DE • January 07, 2023
I was getting really frustrated with our oven. It would preheat to the correct temperature, then slowly lose heat until it was down to about 200 degrees. So it took about two hours to heat a pizza!
Finally decided to repair the oven myself, rather than pay $300.00 to have a repair person come out. Ordered the replacement igniter from AppliancePartsPros.com, and it arrived in two days.
I followed the instructional video on the AppliancePartsPros.com website, and it was going well until I...
Read more
More
Genuine Ge part
By: Ge
Part Number: WB48X10056
Broiler pan for ranges and ovens. Installs in main oven cavity to hold food under broiler element. Replace if cracked, warped, or heavily stained.
Do-It-Yourself Stories from Customers like You
None Ralph W. • Brentwoo , NY • July 13, 2014
Fast delivery, great service
Read more
More
Genuine Ge part
By: Ge
Part Number: WB2K15
The Bumper is an OEM part for GE ranges. It is located on the sides of the oven drawer and serves as a cushion to prevent noise, vibration, and wear. As time goes on, regular use of the appliance can cause it to become damaged or worn out.
Causes of a bad bumper can include wear and tear from regular use, deterioration of the material over time, or damage from excessive force when closing the door.
Symptoms of a bad Bumper include:
- Excessive noise
- Difficulty in sliding the drawer
- Misalignment
- Wear, and increased friction
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Bumbers on stove top grates failed due to time of use Howard V. • Baton Rouge , LA • February 14, 2016
Looked for the parts at this site and ordered those need plus spares
Read more
More
Genuine Ge part
By: Ge
Part Number: WB19K10025
Thermocouple sits in the pilot flame and signals the safety valve. Replace if the tip is melted, burned, or eaten away to restore pilot operation.
Do-It-Yourself Stories from Customers like You
The thermocouple on my stove wasn't working the tip of it was all eaten away by the pilot Mary M. • Sandwich , MA • August 07, 2014
By replacing the thermocouple
Read more
More
Genuine Ge part
By: Ge
Part Number: WB02K10182
Replacement leveling leg for ranges. Installs at base corners to stabilize and level your range on uneven floors. Needed when leg is broken or missing.
Do-It-Yourself Stories from Customers like You
One leg broke off. James F. • Laurel , MD • August 05, 2017
Attached new leg and leveled the range.
Read more
More
Genuine Ge part
By: Ge
Part Number: WB16K10061
Oven pilot assembly with thermocouple installs in gas range to maintain steady pilot flame. Replace when pilot won't stay lit, flame is weak or unsteady.
Do-It-Yourself Stories from Customers like You
The initial complaint was the oven did not work when i went to check the oven pilot it was not lit i was unable to keep the pilot lit Wayne C. • Alameda , CA • January 28, 2017
I discovered the oven thermocouple was broken and burned off at the end. This prevented the oven pilot to remain lit after releasing the oven control knob.
I ordered a new thermocouple which was part of the oven burner assembly. The oven now works just fine.
Read more
More
Genuine Ge part
By: Ge
Part Number: WB28K10578
Fix a burner that won't adjust or turn off properly. This gas valve controls flame height from simmer to high heat. Moderate DIY difficulty.
Do-It-Yourself Stories from Customers like You
Broken stove burner valve David N. • Bethel , CT • April 06, 2018
Replaced the part.
Read more
More
Genuine Ge part
By: Ge
Part Number: WB28K10376
Replacement orifice spud that threads into the cooktop surface burner holder to meter gas flow. Needed when converting fuel types or replacing worn parts.
Do-It-Yourself Stories from Customers like You
That had wrong orifice Soledad M. • Harlingen , TX • August 05, 2014
We change Orifice from Natural to LP
I have a question do I need to get special part for the oven ?
Read more
More
Genuine Ge part
By: Ge
Part Number: WB02K10156
Maintains proper gap between range components for secure mounting. Replace if worn, missing, or cracked to prevent panel rubbing and ensure correct alignment.
More
Genuine Ge part
By: Ge
Part Number: WB1K5062
Replacement mounting screw secures panels, brackets, and trim on ranges and cooktops. Install to replace missing, stripped, or rusted fasteners.
Do-It-Yourself Stories from Customers like You
Cooktop needed aesthetic overhaul. Barbara B. • Wyncote , PA • March 26, 2020
I replaced damaged burner bowls (drip pans), now my cooktop looks like new!
Read more
More
Genuine Ge part
By: Ge
Part Number: WB03K10035
Black control knob for gas range top burners. Mounts on valve stem to adjust heat settings. Replace worn, cracked, or missing knobs to restore control.
Do-It-Yourself Stories from Customers like You
A front control on/off kob was missing James R. • Denver , CO • October 11, 2014
We ordered the part from you which arrived promptly and simply pushed it into place.No tools were required and everything works well and looks good.
Read more
More
Genuine Ge part
By: Ge
Part Number: WB03K10159
Black thermostat control knob for range ovens. Replaces worn, broken, or missing temperature knobs. Restores smooth turning and clear pointer alignment.
More
Genuine Ge part
By: Ge
Part Number: WB1X5364
Secures components to your appliance chassis for a rattle-free fit. Replace missing, stripped, or corroded screws to keep panels and brackets aligned.
More