Kenmore Refrigerator 596.58642891 (59658642891, 596 58642891) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: W10709801
This replacement screw fastens internal components and panels so parts stay secure and quiet. It's a direct-fit fastener used where the original mounting screw is missing or damaged to restore proper assembly. What it does:
- Secures panels, brackets or components to prevent movement and vibration
- Restores proper alignment for covers and access panels
- Stops rattling or loose-fitting parts caused by a missing or stripped screw
- Works as the factory-specified fastener for the original mounting point
What's included: One screw Install notes:
- The screw location and type before installing; use the original hole and thread
- Power off and disconnect the appliance before accessing internal components
- Start the screw by hand to avoid cross-threading, then snug with the appropriate screwdriver
- Do not overtighten — stop once the part is secure to avoid stripping or cracking
More
$8.56
- Compare At:
-
$10.19
- You Save:
-
$1.63
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: W11033771
This drive coupling connects the washer motor to the transmission, transferring power to spin and agitate the tub. Replacing a worn coupling restores proper drivetrain engagement and reduces slipping, grinding, or loss of agitation. What it does:
- Transfers rotational force from the motor to the transmission so the washer can agitate and spin.
- Failsafe for worn motor-to-gearcase connection; a broken coupling commonly causes no-agitate or no-spin symptoms.
- Can produce burning smell, loud grinding, or slipping when deteriorated.
- Helps prevent further damage to the motor or transmission by isolating shock loads.
What's included: One drive coupling Install notes:
- Disconnect power and water before starting any repair.
- Basic disassembly of the washer cabinet and access to the motor/transmission area is required.
- Verify correct alignment of tabs/slots during installation to ensure proper engagement.
More
$18.95
- Compare At:
-
$22.55
- You Save:
-
$3.60
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 12992301
$16.78
- Compare At:
-
$18.64
- You Save:
-
$1.86
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WPM0322202
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 10906501
$20.36
- Compare At:
-
$22.39
- You Save:
-
$2.03
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 10906503
$20.36
- Compare At:
-
$22.39
- You Save:
-
$2.03
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 12187603
This metal bottom hinge shim helps level and align the appliance door by providing a thin, durable spacer under the bottom hinge. Proper shimming restores correct door fit and reduces rubbing or uneven gaps for reliable sealing. What it does:
- Adds precise spacing under the bottom hinge to correct door height and tilt
- Helps stop door rubbing, binding, or uneven gaps that can affect sealing
- Restores proper door alignment so the latch and seals engage correctly
- Durable metal construction resists compression for long-lasting support
What's included: One metal bottom hinge shim. Install notes:
- Disconnect power and empty or support the door before working on hinges to avoid injury or damage.
- Support the door while removing hinge fasteners; small shims are installed under the hinge plate.
- Use the correct size fasteners and torque per the manufacturer; replace damaged hardware as needed.
More
$4.66
- Compare At:
-
$5.55
- You Save:
-
$0.89
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 12534801
This timer mounting bracket secures the appliance timer assembly to the cabinet so the timer stays aligned and stable during operation. Replaces a worn or broken bracket to restore proper timer support and reduce vibration. What it does:
- Holds the timer/timer motor firmly in place on the control panel or chassis
- Prevents the timer from shifting or rattling during cycles
- Helps maintain proper gear alignment for accurate cycle timing
- Commonly replaced when bracket is bent, cracked, or missing mounting studs
What's included:
- One timer mounting bracket
Install notes:
- Basic hand tools required; disconnect power before beginning repair
- Inspect related fasteners and the timer housing for additional damage
- Handle the timer assembly carefully to avoid damaging wiring or connectors
More
$9.72
- Compare At:
-
$10.69
- You Save:
-
$0.97
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 12990523
$3.33
- Compare At:
-
$4.33
- You Save:
-
$1.00
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: A3044208
$5.46
- Compare At:
-
$6.01
- You Save:
-
$0.55
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: M0274067
$5.46
- Compare At:
-
$6.01
- You Save:
-
$0.55
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: M0581001
$5.46
- Compare At:
-
$6.01
- You Save:
-
$0.55
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: M0585403
$5.46
- Compare At:
-
$6.01
- You Save:
-
$0.55
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: R0161088
The Defrost Thermostat is an OEM part for Whirlpool refrigerators. This thermostat regulates the temperature within the defrost cycle, ensuring that the defrost heater activates and deactivates at the appropriate times to prevent frost buildup on the evaporator coils.
Causes of a bad defrost thermostat can include electrical failures, wear and tear over time, or damage from temperature fluctuations.
Symptoms of a bad defrost thermostat include:
- Excessive frost buildup in the freezer
- The refrigerator not maintaining proper temperature
- The defrost heater not turning on
- Water leakage inside the refrigerator
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Freezer and refrigerator boxes not holding temperature Robert N. • Bonita Springs , FL • May 01, 2015
After running some tests I determined that the problem was a bad defrost timer. The timer
would occasionally fail to trigger the compressor to restart at the end of the defrost cycle.
Since I had the unit taken apart, I replaced the termination t-stat and the compressor start relay at the same time.
Parts came quick 1.5 days, job completed and the unit is up and running.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP67002052
Do-It-Yourself Stories from Customers like You
The plastic wheel in the ice crusher broke into pieces and the ice bucket had a crack in it Carol C. • Weatogue , CT • August 07, 2015
The bucket was an easy fix. There is a film on the website showing exactly how to replace it. The ice crusher was a bit of a problem because it had to be completely taken apart -- many small parts to put back in order!! We used the diagram from the website, plus I took photos from various angles before we took it apart. We were careful, and with patience, it went back together.
We ordered the parts on a weekend, and expected it to take a few days. The parts were sitting in our...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPC8973801
Do-It-Yourself Stories from Customers like You
Clip in freezer broke Donna B. • Middletwon , NJ • July 04, 2014
Twisted old clip out and new one in. Works little different then video. This clip doesn't work with wrench.
Read more
More