Platinum Lawn Mower Parts

Silver shaft pivot arm supports and enables front wheel turning on walk-behind push mowers. Replace if cracked, bent, or broken from over-rotation.

Drive wheel kit for walk-behind mowers. Replaces worn, cracked, or damaged drive wheels that affect self-propulsion. Includes components for wheel assembly.

This replacement part is a V-belt. This is a genuine replacement part made by MTD. V-belts are usually found in engines and allow for the parts to run smoothly and efficiently while in use.A new v-belt might be needed if the current one is becoming worn down or is damaged. This can be caused by normal wear and tear over time as belts typically experience lots of friction during use. Be sure the engine is completely turned off and cooled down before attempting to replace any kind of belt. Refer to the owner manual for more specific directions on how to replace this part.This v-belt is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

The height adjustment assembly is a replacement part that is designed for use in select walk-behind lawn mowers. The adjustment assembly includes nine total height adjustments and installs on the front wheel of the unit to allow the user to adjust the wheel height and cutting height before each use. The metal height adjustment assembly is exposed to constant impacts and repetitive motion, which can lead to damage or wear. If the height adjustment fails, the mower may be inoperable until the part is replaced. This genuine OEM part will provide the appropriate replacement for select models from MTD, as well as those from Troy-Bilt, Bolens, Yard Machines, Yard Man, Husky, and Cub Cadet. It is sold as an individual assembly and the hardware required will be sold separately. This is an identical replacement for the right side of the mower. It is important to wear gloves when working on the mower deck and allow the unit to cool completely for safety. The height adjuster will take a wrench or socket set and screwdrivers to install.

Height adjuster assembly for walk-behind mowers. Installs on deck to control blade cutting height. Replace if cracked, broken, or no longer holds position.

This is a height adjuster knob for walk-behind lawn mowers. It attaches to the height adjuster lever. This component is used to adjust the front wheels on the lawnmower deck. This adjustment allows the user to select the desired cutting height of the grass. This component is made out of a hardened foam material that is easy to grip.If the height adjuster knob falls off of the height adjust lever and will not reattach, it is likely that it will need to be replaced. The height adjuster lever itself is sold separately. The repair person may wish to wear gloves when replacing this part.This component is sourced straight from the manufacturer. It is sold individually and is a genuine OEM part. This height adjuster knob is compatible with walk-behind lawnmowers that are manufactured by the Ryobi, MTD, Yard Machines, Troy-Bilt, Bolens, Yard-Man, Cub Cadet, Craftsman, and Husky brands.

Replaces worn, dull, or damaged 21-inch mulching blades on walk-behind mowers. Features curved design for effective mulching. Upgrade your rusty blade.

Flange lock nut secures components on mowers and outdoor power equipment. Replace if stripped, corroded, or missing to restore proper fastening.

Hex bolt secures blade adapter and other components on lawn mowers. Replace if bolt is stripped, damaged, or missing to properly fasten parts.

A flange lock nut, also known as a flange lock or a lock nut, is created to be used in various types of lawn and garden equipment. This flange lock nut holds other parts in place and, when properly threaded, will resist loosening. Over time, a flange lock nut may begin to weaken and may become loose or break. If it appears to be broken or weak, a replacement is required. Flange locks can be adjusted and uninstalled after use. When replacement is required, you may need a socket set, screwdriver, hacksaw, and butane torch. The socket wrench will loosen the bolt it is connected to, while the torch is used to heat the lock nut. A socket wrench may remove the nut, but sometimes cutting it with a hacksaw is required. This flange lock nut is a genuine OEM component directly from the manufacturer and comes in an individual unit. It is made of metal, a gold color, and can be found in various areas of lawn equipment. It works with lawnmowers, trimmers, snowblowers, cultivators, tillers, and leaf blowers by Poulan, MTD, Toro, Cub Cadet, Murray, Troy-Bilt, Bolens, Yard Machines, Craftsman, and Yard-Man.

This is a flanged lock nut. It’s designed to apply tension, typically on a joint that needs to have a certain amount of flex. As such, it’s mostly used on snowblower chutes and lawnmower handles. They can remain in place, but with a forgiving connection that can take a beating. The nut size is 3/8, with a thread size of 16. A lock nut will generally last for many years. However, the silicone ring inside will wear down if it’s frequently tightened and loosened. It needs to be replaced when it will no longer reliably remain in place. Generally, this begins as a symptom of slight slippage and worsens as time goes on. Thankfully, whether it’s being used on a snowblower or a lawnmower, this nut is generally straightforward to access. Simply unscrew the old nut, then screw the new nut on until it’s nice and tight. Our flanged lock nuts are genuine OEM MTD nuts, and they are sold individually.

Mower vibrating excessively or blade loosening? This blade adapter connects the motor shaft to the mower blade. Simple DIY repair, typically 15 minutes.

Replacement wheel assembly for walk-behind mowers and lawn equipment. Installs on axle to restore mobility. Order when wheel is cracked, broken, or worn.