Robin December 11, 2014 for Model Number WFMC3200UC/01 FD8411 900408 My washer has serial number 85411008266300408. What is the correct door seal kit product number? Thanks, RR. Robin R. for Model Number WFMC3200UC/01 FD8411 900408
Chris R. November 09, 2014 for Model Number WFMC3200UC/01 My washer has serial number 85404008266303056. What is the correct door seal kit product number? Thanks, CR.
Elizabeth June 12, 2014 for Model Number WFMC 64000 UC/01 | FD 8503 | 900191 I was given a Bosch washer, but the inside gasket and ring are full of mold which I can't get rid of. What would you suggest I purchase to get rid of it?
1 Answer Hello Elizabeth. You need to clean the boot with hot water and vinegar and it will need to be scrubbed most likely. Read More...
Daniel May 29, 2014 for Model Number WFMC2100UC/01 FD8604 900520 Looking for correct part number for a door boot seal for model number WFMC2100UC/01 FD8604 900520. Thank you!
Tomodo May 10, 2014 for Model Number Bosch nexxt WTMC 6300 us/01FD8403301186 Black oily substance streaks on clothes after drying.
1 Answer Hello Tomodo, You should change the drum seal 00241091. The clothes get the stains from being pinched in the edge of the drum where there is too much play at the seal. Read More...
Martin April 06, 2014 for Model Number Bosch WFMC2100UC/01 FD8505|900121 Im looking for gasket for washer. Im not really sure which one need. Serial number 855050083944001214.
1 Answer Hello Martin! The boot gasket listed for your model and series is part number 00667489. Thanks! Read More...
Lisa S. March 30, 2014 for Model Number Siemens WFXD8400U/01 What is the correct door gasket/seal part number for my Siemens ultraSense plus model number WFXD8400U/01 | FD 8502 | 900465? Thanks in advance.
1 Answer Lisa, the boot gasket listed for model WFXD8400UC/01 is part number 00246270. Thanks! Read More...
Siemens Wfxd March 25, 2014 for Model Number Siemens WFXD8400UC/1 My version of the washer (Siemens FD84XX) requires the flushing hose nipple for the boot gasket. Per the instructions that came, I should "Route flushing hose under strut & black tub vent hose. Note spare dispense port (for hose end taken from gasket). Push flushing hose onto spare dispense port. Hose has little water pressure and shouldn't leak -- install hose clamp if desired (175764)." However, the flushing hose will not fit on the spare port. They have approximately the same internal diameter. Do I need a different / new hose to fit?
1 Answer Hello, The simple fix for this situation is to locate a screw/bolt that will fit tightly in the end of the hose and put a clamp on it so it cannot come out or leak. You will have to tape the hose to a neighboring hose so it cannot bounce around inside the cabinet and contact anything that would make an unusual noise. Read More...
Keith W. March 21, 2014 for Model Number wfmc3200uc/01 | FD 8312 | 900113 | serial 8531200826630011 I obviously have ordered the wrong gasket and want to make sure I get the correct one this time. The model number has faded and I had to guess, which I was obviously wrong based on the size I received. Can you please verify which boot gasket I need. I believe I have the correct model number. Thanks.
1 Answer Keith, according to the information given the replacement boot gasket is part number 00246270. Thanks. Read More...