Rg December 21, 2014 for Model Number Thermador Pro PRG366 Need to remove the venturi screws from sockets to access valves. One is stripped in the socket and spins freely now but can't be removed. Any suggestions for removing?
1 Answer RG, You will want to try to lift on the part that it is holding it down and put upward pressure on it to see if you can get the threads to grab. Read More...
Steve H. December 14, 2011 for Model Number PRG364GLUS Thermodore Stove The simmer rear burner does not work. A technician was here yesterday and needed to remove the burner orifice from both each burner base to replace the simmer burner valve. He was able to remove one orfice on the burner base and the other orifice would not unscrew it was on so tight. Any suggeston on how to remove the other orfice?
1 Answer Hello Steve. You will need to hold the burner base 00415014 and make sure you have a good fitting socket on the orifice. Turn it slowly and use force to remove it. Make sure you hold the base to prevent bending the lines. Hope this helps. Read More...