Steve October 09, 2022 for Model Number SHE43RL5UC/64 Hi: The large plastic button on the fascia doesn't seat properly on a newly installed plastic fascia which cracked. The buttons seats well on the old cracked fascia but doesn't sit completely in replace on the new one. The result is you can press once to urn on but it doesn't spring back to press again. Any tricks on how to seat the plastic properly to align when it is secured with screws. Thanks
1 Answer Steve, You will want to make sure that everything is in place like the original but this should work properly and you may need a new button 00424673. Read More...
Michael T July 29, 2020 for Model Number Bosch Dishwasher SHE58C05UC/48 my Bosch Dishwasher SHE58C05UC/48 is missing the on/off button cover, it cracked and fell into the front panel. I can still turn the dishwasher on and off by sticking my finger into the hole at the top, but it looks bad. What is the part number to replace it. I keep seeing search result for the on/off switch, but the switch itself is working I just need the button cover.
1 Answer Michael, the manufacturer does not list an On/Off button for the [SHE58C05UC/48] dishwasher. You will need to order the 00477282 / 00477282 Fascia Panel to receive the On/Off button. Unfortunately, the fascia panel is out of stock and would need to be ordered from the manufacturer. This will add a few days to the delivery time, once you place the order. Thanks, Read More...
Michael July 29, 2020 for Model Number e103022 bosch dishwasher my e103022 bosch dishwasher is missing the on/off button cover, it cracked and fell into the front panel. I can still turn the dishwasher on and off by sticking my finger into the hole at the top, but it looks bad. What is the part number to replace it. I keep seeing search result for the on/off switch, but the switch itself is working I just need the button cover.
1 Answer Michael, unfortunately, the model number provided is not registering as a valid model. If the full model and serial numbers could be verified and provided in a new question, this will allow for the most accurate information to be presented. Read More...
Rebecca Campbell June 02, 2020 for Model Number SHE3AR72UC/26 I’m having trouble with the button panel. If I decide to change the wash mode how do I cancel it out. I don’t always need it to run for 2 hours or more but once it’s set it won’t let me change it.
1 Answer Hello, Rebecca. Here is what the owner's manual says:Terminating the wash cycle (Reset) :1. Press and hold Start button in for approximately 3 seconds until the display reads ‹:‹. 2. Wait about 1 minute while the dishwasher drains. 3. Press On/Off button.You may now power the dishwasher back on and begin a new cycle if desired. Changing the wash cycle: When the Start button has been pressed, the wash cycle cannot be changed. The only way a wash cycle can be changed is by terminating the wash cycle (Reset).Thank you. Read More...
Randy May 27, 2020 for Model Number shu 9955 uc/12 I'm replacing my on/off button {00184590) on my Bosch shu9955 uc/12. Do I have to remove the door panel, then the top control panel to get to the on/off button, or do I only need to take off the top control panel to get to the button?
1 Answer Randy, with the power supply off, the top control panel would need to be removed to allow for the on/off switch 00175338 to be changed out. Read More...
Kraig April 06, 2020 for Model Number Bosch she 4800 3uc/u07 The on off button will not stay pushed in. When pushed the lights come on as if it is ready but once your finger withdrawals pressure the lights go off. Recommendations?
1 Answer Kraig, based on the information provided, the on/off switch 00165886 has failed as it is not locking into the on position. Unfortunately, the manufacturer has discontinued this part and it is no longer available. Read More...
Maxine March 09, 2020 for Model Number SHE58C05UC/48 Hi. The power button for the dishwasher has snapped off, I can still switch it on and off but need a replacement cover. Which part will I need? Thank you.
1 Answer Maxine, The only way to get the button for this on/off switch is to get the fascia panel 00477282. The manufacturer does not have the buttons separately. Read More...
Charlene November 27, 2017 for Model Number SHE43RF6UC/64 The round button on my black dishwasher broke off and I can't find a replacement button for this model.
Jamie September 13, 2017 for Model Number SHU3305 UC/12 (FD 8101) One of the buttons on the front of the dishwasher is broken: the "Regular Wash" button. I bought a new one from you, but I don't know how to install it.
1 Answer Hello Jamie. In most cases you will need to dismantle the control panel and control module. here's some basic, general help: " Disconnect wire harnesses from module after noting connector locations. Remove fascia panel from console by removing four (4) T-20 Torx screws. Remove two (2) T-20 Torx screws holding module to console. Carefully pry back locking tabs on each front corner of module, then remove module from console. Remove button pad from module." Thanks and Good Luck Read More...
Phil August 16, 2016 for Model Number SHE58C05UC/46 I broke the round plastic on/off button on the control panel. It finally snapped after 8 years of use. The switch is fine; I can still push it to turn on the dishwasher, but there is a hole where the plastic button should be covering it. What part do I need?