Jan August 02, 2018 Bosch Dishwasher #SHE44C7UC-48 When I pressed the on button it stayed pushed in, but also the 4 wash and dry buttons pushed in at the same time, so that I couldn't select a wash cycle. My question is , do I need to replace the power on/off button plus the wash cycle b? Thank you
1 Answer Jan, You will need to remove the outer door panel and fascia panel 00475227 and panel frame 00432779 and check to see which part has failed or cracked/broken, then check the control module and start switch tabs to see what has damaged the retainer tabs. " Remove six (6) long fascia panel screws from top of inner door, then lift fascia panel out from door. Be careful to not damage wire harnesses. Six (6) inner door screws are different, so don’t mix screws when removing fascia panel and inner door. Dishwashers have separate (short) on/off switch and display module wire harnesses held in fascia panels by connectors. To remove connectors, pull up from fascia panel. Remove handle trays (SHE models) before removing display modules. To remove both, carefully pry in plastic clips. For display module, start prying clips from one side and gently lift display as you pry clips from one side to the other. When reassembling fascia panels to doors, make sure fascia panel tabs insert outer door slots." The panel or switch retainer tabs have "loosened" or cracked/broke and the switches aren't aligned to the fascia or frame and are "stuck" or "sticking". Read More...