David February 13, 2024 for Model Number HBL8651UC/01 The convention fan isn't running when we chose convention from the display. The fan blade turns freely, check continuity at the fan motor and saw resistance on the ohm meter. We have no error codes on the display. Any ideas?
1 Answer David, if the resistance measured was about 496 Ohms, the failure would be in the relay control 11020742. However, if the resistance was not about 496 Ohms, the convection fan motor 00642845 has failed. Read More...
Ray December 17, 2023 for Model Number Bosch HGI8054UC/06 gas oven Looking for some direction if anyone has experience. My oven would not light this morning. It appears the bake burner nor the broiler burner will light. The stovetop and electric element for the warming drawer work fine. I did a power reset and nothing changed. Most of the advice I have found in web searches deal with ignitor issues when either the bake or broiler burner won't light. Since neither will light I assume the problem is elsewhere. Any tips on where to start?
1 Answer Ray, You will want to access the control board for the unit and test to see if there is power coming out of the control board to the bake and broil igniter when set for that cycle. If there is not 120 vac then this will be a faulty control board. Read More...
Nilus September 12, 2023 for Model Number Bosch HGI8054UC/01 The oven power goes off at random times. The panel looses power asleep but the starters still work. Does this mean the board needs replacing?
1 Answer Stan, with the power supply cord unplugged, the control module 12012946 would be accessed by removing the back panel of the range. Read More...
Bryant June 27, 2023 for Model Number HGI8054UC/04 I have an error code: E118 on my HGI8054UC slide in oven. What does it mean and what can I do to fix it?
1 Answer Bryant, the error E118 indicates the cooling fan 12011471 speed is too low. This can be checked by running the fan in a test mode or by starting a self-clean cycle. If the fan turns on and creates good air circulation, the control 12012946 would be the likely cause of failure. Read More...
Marvin June 14, 2023 for Model Number HGI8054UC I have an error code: E118 on my HGI8054UC slide in oven. What does it mean and what can I do to fix it?
1 Answer Marvin, This error code will be a cooling fan speed too low. Check the connections to the fan and control module. Check all wires for being pinched or damaged. Check fan for operation and or blockage and/or mechanical jamming of the fan. Run fan test in service mode. Read More...
Oleksandr July 18, 2021 for Model Number hgi8056uc/1 Hi! Do you know which module corresponds to Touch Control Module (TCM), error E044? We have tried to replace Display Module but it did not help. We are ordering the Front Panel now in case it's an issue with touch screen itself.
1 Answer Oleksandr, The touchpad would be the most likely cause for this issue with the error of a touch control module error. Read More...
Amanda September 05, 2019 for Model Number HGIP054UC/04 I'm looking for the control unit / display unit for bosch oven. Is the control unit and display unit a combined unit? Is it part 12012946?
1 Answer Hello Amanda, The display module is 12029207 and the control module is 12012946. These are two individual components. Read More...