Lester November 11, 2020 for Model Number She55rf5uc/69 What is the difference between the pc control board and the control unit what does each control?
1 Answer Lester, the control unit 00706023 is the power control board responsible for supplying the necessary voltage to every component. The PC board 00497039 is a digital display. Read More...
Trinh November 05, 2020 for Model Number SHE55RF5UC/69 My dishwasher is dead. Power is good, It has 12v to control unit. No indication at both control unit and PC board. Help!
1 Answer Trinh, If there is 120 Vac to the control unit but nothing else is working then this will be a faulty control unit that will need to be replaced. Read More...
Jt July 04, 2020 for Model Number Bosch Dishwasher SHE68M05UC/50 On my Bosch dishwasher (model SHE68M05UC/50) the pump runs constantly and none of the display lights are on. There is no water in the base of the dishwasher. This condition happened suddenly one evening and have not changed over the past few days. The reset sequence (pressing 3 buttons) does nothing. When I access the float and manually move it up and down, I can hear the switch click but the pump motor continues unchanged. Any sense when might be defective?
1 Answer Jt, The pump constantly running would be caused by a faulty control unit. The relay that controls the pump is most likely stuck and the control unit will need to be replaced. Read More...
Rachel January 12, 2020 for Model Number SHE43RF2UC/64 I have the white Bosch dishwasher and want to change the front to stainless steel. I read another comment on the Door-Outer page (AP4300468) that said I only needed the Door-Outer and Panel-Front (AP4300189). The door installed beautifully, but the panel front seems to require a new PC Board (AP3908884?) and new Control Unit (this part AP4509327). Is that correct? Do I need anything else, like the cable harness (AP3954705)?
Nestor November 23, 2019 for Model Number SHE65P06UC/63 My dishwasher suddenly stops working after the power went out. Since then, it turned on by itself 3 times in the last 6 months. Do I have to order a front panel or could it be something else ?
1 Answer Nestor, This issue sounds likely that the control module is faulty and would need to be replaced. The part number for the control unit will be 00676934. Read More...
Kevin October 02, 2019 for Model Number SHX68R52UC/67 I suspect I need to replace the heater relay switch which is a component on the board inside the Bosch Control Unit. My question is whether the "Control Unit AP4509327" includes the circuit board inside it or whether it's just the plastic housing for the PC board? I see another part called "PC Board AP5326203" so am wondering if I need that as well or whether the Control Unit will surfice?
1 Answer Kevin, the control unit 00706023 contains the main control board. The PC board 00497039 is going to be a separate control found near the user interface. Read More...
Eric August 23, 2017 for Model Number SHE68R52UC/67 Hi, while my dishwasher seems to work properly, the front display key is now black and doesn't show any information. What piece should I be replacing? Thank you.
Steve September 22, 2015 for Model Number SHE65P05UC/58 My dishwasher won't start. I have lights on the top control where I can change cycles and choose options but I do not have display on the front control. When I select a cycle and close the door I hear a momentary sound from below like a pump starting for about a half a second and that is it. I believe it to be a control issue but do not know if it is the control under the buttons on top or the control that has the display in front Thanks Steve
1 Answer Hello Steve. It sounds like the PC board 00643268 is bad and will need to be replaced on the unit. Read More...
1 Answer Hello Mike, If you could re-post with the model number from the units' I.D. tag, we can pull the parts information and possibly send you some illustrated instructions. Thank you for your patience and understanding in this matter. Read More...
Scott August 27, 2014 for Model Number part #00676935 control unit to Bosch dishwaser Is this easy to replace or do I need to call appliance person to replace?
1 Answer Hello Scott. The control unit is not hard to replace on the dishwashers. Just make sure you have the power turned off before replacing the part. Read More...