Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Customer Questions and Answers for Convection Ring Element, 240V/2400W by Bosch

Best Seller
Manufacturer Part
4.89 (64)
By: Bosch
Part Number: OEM8402118
Manufacturer Part Number: 00097855

This convection ring element supplies the heat for the oven's convection bake and roast cycles. Replacing a failed element restores even convection performance so foods cook properly across multiple racks.

  • Provides the heat source for convection modes; the fan circulates air across this ring for uniform baking
  • Common symptoms of failure: no heat in convection, very long preheat, or uneven results during convection cycles
  • Visual clues include cracks, blistering, or burn-through on the element band
  • Electrical clue: element tests open/infinite (OL) with a multimeter when power is disconnected
What's included: One 240V/2400W ring-style convection heating element with terminal ends. Install notes:
  • Disconnect power at the breaker before servicing; this is a high-wattage circuit
  • Access varies by model: remove the rear panel or the interior convection cover to reach the element and terminals
  • Note wire locations and transfer leads to the new element one at a time
  • Ensure the element sits flat and does not contact the cavity walls; tighten mounting screws snugly
Specs: 240V, 2400W

More
$135.37

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart

Questions & Answers

For Bosch Convection Ring Element, 240V/2400W (Part Number: OEM8402118)

1 Answer

William,

The wattage difference will not hurt anything as it is within a 10 percent variance but we cannot guarantee that it will fit like the original.

Read More...

1 Answer

John, Yes, the 00097855 / 00097855 Convection (ring) Element, 240V/2400W, Eb 600/800 Series, Is the correct convection element for the model number you supplied. The part is in stock and available at this time. Thanks,

Read More...

1 Answer

Paul,

Yes, you can put the red or yellow wire on either connection of the element.

Read More...

1 Answer

Hello Andrew,
Make sure the wires cannot touch anything and turn the unit on to the convection mode. Testing with a voltmeter from the red wire, test to the other two wires. The one that reads 240Vac will be the one that goes to the other heating element terminal. The other wire will go to ground.

Read More...

Have questions? Ask our pros!

Contact us in a way that is convenient for you

Call us 1-877-477-7278
Need Help? Chat with a Pro
Or ask a question by filling in the form

Share your thoughts with other customers

Ask a Question
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google