Jennifer March 07, 2019 for Model Number Bosch SHE45M02UC/48 I need to connect the dishwasher drain hose to the air gap. Is this the correct part? The video shows it connecting to the garbage disposal. That is not what I am trying to do. It has to connect to the air gap.
1 Answer Jennifer, this item should work. This item does not come with hose clamps though. Part number [00088403] is the same connector but it comes with hose tension clamps. Read More...
Morgan W. July 06, 2018 for Model Number SHX33A05 UC/14 (FD 8211-) I need to add an air gap to this dishwasher as I am selling the home and the inspector required it. I also will be replacing the drain hose also. My concern is that the inlet on the air gap is only 5/8”. How do you connect to a 5/8” inlet vs the 7/8” inlet of the garbage disposal and what parts are required? Please let me know. Thanks
1 Answer Hello Morgan, Look for an additional hole pre-cut in your sink next to the faucet base. If you have a hole, it will be covered with a round cap. You can pry the cap from the sink with a flat-blade screwdriver or remove the lock nut beneath the sink holding the cap in place. If you don’t have an extra sink hole, you must create a hole for the air gap in the countertop. Tape off an area of countertop directly behind the sink at least 2 inches square. If you have a double-bowl sink, tape behind the side of the sink closest to the dishwasher or tape behind the side that holds the garbage disposal. The masking tape will protect the countertop from damage. Attach a 1 1/4-inch diameter hole saw to a cordless power drill. Position the saw over the tape. Drill through the countertop to create a hole for the air gap. Remove the tape remnants. Access the area beneath the sink. Insert the air gap up through the hole you created in the countertop or the hole in the sink. Have an assistant thread the air gap lock nut onto the threads of the air gap, tightening the lock nut against the countertop. Loosen, but do not remove, the screw on the hose clamp that holds the dishwasher drain hose to either the garbage disposal or the sink drain. Pull the drain hose off the sink drain or garbage disposal and slide it over the smaller of the two legs on the air gap. Secure the dishwasher drain hose to the air gap by tightening the hose clamp screw. Cut a length of 7/8-inch inside-diameter drain hose to fit between the air gap and the sink drain or the garbage disposal. Slide a hose clamp onto each end of the new drain line. Attach one end of the drain line to the remaining leg on the air gap and tighten the hose clamp screw to hold it in place. Attach the remaining end of the drain line to either the sink drain or garbage disposal and secure it with the remaining hose clamp. Slip the air gap beauty cover over the plastic portion of the air gap on top of the sink or countertop. Rotate the beauty cover where the vent slots point toward the sink. Things you will need ?Flat-blade screwdriver?Masking tape?1 1/4-inch hole saw?Cordless power drill?7/8-inch inside-diameter drain hose?Hose clamps Read More...