Smez July 04, 2022 for Model Number B26FT70SNS/04 What is the part number for the plastic “lever arm” for the ice maker. It’s the arm that moves up when ice bin fills. Ours snapped in half and I can’t find part number anywhere. It’s one screw and should be easy, cheap fix.
1 Answer Smez, unfortunately, the manufacturer does not provide the ice level arm separately from the icemaker 11033701. Read More...
Henry March 19, 2022 for Model Number B26FT70SNS/07 How to remove ice maker? After removing front mounting screw, I can slide ice maker forward an inch or two. Then it seems to be restrained by something at the rear of the ice maker. Perhaps the air channel is interfering? If so, how to detach?
1 Answer Henry, with the ice bin removed, the lamp cover and 2 screws just next to the ice maker would need to be removed along with the lamp base and PCB housing once exposed. From there, remove the 4 screws located on the side of the ice maker section and top. This should allow the ice cabin walls to pull forward just enough to access the wires in the back which will need to be unplugged. This will allow the entire section to pull forward and out to remove the ice maker. Read More...
Ben June 05, 2021 for Model Number AP6974042 Hi, I bought this ice maker because my bail arm broke and I needed to replace the whole unit. The unit I got did not come with a bail arm and the location is different. How do I get a bail arm?
1 Answer Ben, if the model number of your appliance could be provided in a new question, this will allow the most accurate information to be presented. Read More...
Julie May 19, 2020 for Model Number B20CS80SNS/02 The ice maker lever only works when I adjust it manually. How can I fix it to operate on its own?
Peter September 11, 2019 for Model Number B26FT79SNS Ice maker only makes 1-2 trays per 24 hours. What is wrong and how is it fixed.
1 Answer Peter,There is a fan in your freezer compartment 00649619 that moves freezer air up into the ice maker compartment. If this fan is not operating or ice is built up around the fan and the channel is blocked it will take alot longer for temps in the ice maker compartment to be cold enough to make ice. Remove the evaporator cover in the freezer and make sure all your connections are good and no blockage is there. Read More...
1 Answer Gregg,We sent you some pages from the manufacturer to aid in the removal of the ice maker. Read More...
Franco July 11, 2018 for Model Number B26FT70SNS/04 I have the same problem as others have posted here. The ice maker shutoff/level arm broke. The ice maker itself seems to work just fine, but would not stop producing ice as the arm is not functioning anymore. It seems to me like a faulty design and the fact of having to buy a $180 part replacement for something that is worth a couple of dollars seems like a nonsense. Anyway, is there a way to replace the arm with a generic part? Best regards
1 Answer Franco, Unfortunately the manufacturer does not offer the icemaker arm individually from the icemaker and will need to replace the icemaker for this issue. Read More...
1 Answer John, For this issue you will want to check to make sure that there is 120 vac getting to the water valve when the icemaker calls for water. If there is 120 vac to the water valve then the issue will be a faulty water valve. If there is no power at the valve then this will be a faulty icemaker. Read More...
Jo January 21, 2017 for Model Number B26FT70SNS I'm wondering if the icemaker works if there's no level arm at all? The level arm on my ice maker broke completely and I'd have to replace the whole ice maker just to replace that little piece of plastic.
1 Answer Hello Jo, The icemaker would still work without the "bail arm" but it will not stop producing ice when the ice bin is full. It will continue making ice even if the freezer compartment is completely full of ice. This is necessary to prevent over production of ice. Read More...
Manuel B January 14, 2017 for Model Number b26ft70sns/04 The internal power led of the Bosch 00658257 ICE MAKER show in color red. Can you confirm if the normal color must to be in green or color red it is the regular color...? The ice maker do not work and the water connection it is fine. Can you have an idea if the indicator in color red have an issue over the ice maker...?
1 Answer Manuel, The red indicator will most likely be correct and we do not have any information on whether there would be green or red led on the unit. If the valve checks ok then this will be a icemaker issue. Read More...