Safedin August 26, 2020 for Model Number WAS20160UC/28 I have a bosch washing machine frontloader I changed the hot water inlet valve but still no hot water comes in the machine. can you help me out and let me know what could be the problem. so I could order the right part. thank you
1 Answer Safedin, it would be recommended that the hot water valve is tested for 120VAC when a hot wash cycle is started. If the valve does not receive 120VAC, the main control 00705463 has failed and would need to be replaced. Read More...
Annie August 02, 2019 for Model Number WAS24460UC/28 Fabric softener remains in dispenser drawer. Drawer top and bottom cleaned, inlet holes in drawer top cleaned, siphon cleaned. When cold water comes into machine there is a slight whining/whiring noise and water flow seems lower than with hot water. Could this part be the culprit?
1 Answer Annie, based on the information provided, the valve 00611703 would be the most likely cause of this issue. If the valve does not open enough, water will not reach every dispenser section as needed. Read More...