Dave C January 05, 2017 for Model Number FGF378ACH Our unit is from 2004 and was converted to propane at that time. Worked well until 3 months ago. We have encountered 4 times when the electronics (clock display is off, controls don't respond) go off and the oven shuts down. It always comes back on after it cools down. Bake time to failure has varied between about 40 minutes and 2-1/2 hours. I hate to spend $200.00 for a new ECB if something else is causing the problem. I appreciate your thoughts on this!
1 Answer Dave, With the control continuously shutting off this issue would most likely be caused by a faulty clock which is part number 316207526. Read More...
Kenneth Duke Masters August 28, 2014 for Model Number Frigidaire Gas stove M# GLGF377ASF Hi: The part you called out for this model number looks somewhat different then the one on the unit. Different button placement. Could this be right? Do I just need a new face plate? While I'm at it let me describe the trouble: Start oven on plain bake mode runs fine then shuts off after 20-30 minutes. I made sure my tenant was not using timed bake by mistake. I used to work for Frigidaire doing A/C refrigeration and appliances but that was 40+ years ago, my how stuff has changed. Thanks, KDM
1 Answer Kenneth, This issue does sound like it would be caused by a faulty control board which is showing as part number 316207526. You would also want to get another Overlay 316220804 because the old one will most likely not reattach properly. Read More...
Bobby June 14, 2013 for Model Number GLGF377ABC Oven when put on pre-heat will get hot over time but always continues to show that it is still pre-heating- takes longer to heat up than believe it should- also has at times when cooking shut down and had to unplug it and plug it back in to get the clock back on and reset it up to continue cooking.
1 Answer Bobby, Based on the information provided it sounds as though the clock 316207526 would be the issue with the unit not operating properly. Read More...
Brion January 08, 2013 for Model Number Fridigaire Range glgf377abc I just got a replacement clock for this. On the bubble wrap it warned not to handle it without a personal grounding device. Can't find one around here. Is there something else I can do?
1 Answer Hello Brion. To ground out, just touch the metal fame of the stove before touching the clock 316207526. Read More...
Charles P December 17, 2012 for Model Number fgfl77abf we have our stove locked in self clean but can not turn it off and will not work by holding clear button we can open oven door but can not get self turned off to use showing code f9 the clock works fine but I think that part of printed circut is out am I on the right track and need to replace clock unit.
1 Answer Hello Charles, You would want to check the wiring between Clock and Lock motor. Also check for binding of the latch cam, lock motor rod and lock motor cam. Check to see if the lock motor coil is open and if open replace the lock motor assembly 5304447728. Check to see if the motor is continuously running if the micro swithc is open replace lock motor assembly. check the oven door light switch to see if it is an open switch when closed. If open when the door is closed then replace switch. If all these do not solve then replace clock assembly 316207526. Read More...
Ed November 09, 2012 for Model Number FGFL77ABF Is it possible to get the plastic housing only for the timer/clock assembly. The ears on the housing have failed over time and broken. My timer/cock assembly is working fine. Thanks!
1 Answer Hello Ed, I'm sorry but, as I look at the part screen, I see no listing for the frame alone. You will have to order the clock assembly 316207526 to obtain the frame assembly. Read More...
Jeff November 30, 2011 for Model Number fgf378ach Turn on right side burner then control panel goes out. I unplug oven then plug back in to get clock to come on. Whats wrong ? Do I need a new control panel ?
1 Answer Hi Jeff. This sounds you have a direct short. You may need to get a qualified service technician to assist you if you do not feel comfortable. Remove the power. Then remove the back guard and see if you have the wiring diagram. It will be there or by the drawer after you remove the drawer. It is also easier to remove the door and then pull the unit out. Make sure your 120 vac power cord is tight at the terminal block. Then remove the knobs, end caps and the switch panel. Inspect the switch to see if a wire is touching the frame or chassis. Let us know if you need the switch part # 316219004 , or the clock control part # 316207526. Thank You. Read More...
1 Answer Hello Mike. The F1 code is for a clock failure. The manufacture recommends replacing the clock for this code. Hope this helps. Read More...