Matt February 13, 2018 for Model Number EW28BS71ISC I have the french 3 door Electrolux fridge. Put it in cold storage before winter, working perfectly fine. Went over to plug it in, and found out it's showing approximately every 3 sec.Alarm in red " Power Failure" There is no lights in the fridge, the compressor doesn't work. I checked out the compressor resistance on the pins is fine, the compressor Electronic Board seems fine with no burned out components. There seems to be no AC power going in to the 2 pin connector to the compressor board (unless is already converted to DC Voltage. I checked out the main board and the freezer board and all seems to be fine. At the time of the blinking in red "Power Failure) impulse, I can hear some knock-knock-knock in the back wall of the freezer, and the compressor cooling fan is trying to turn but it immediately stops. I would appreciate any help or hint what the problem might be. I will buy the necessary part if I know what's needed. Thanks in advance. Matt R.
1 Answer Matt, You will want to hit any button to clear the PF error and if this does not correct the issue then it will most likely be a faulty main control board. Read More...