Dustin June 05, 2017 for Model Number FGFL79DSG I need the correct orfices to convert a FGFL79DSG back to natural gas and is there anything else i need to do? Thanks
1 Answer Dustin, For the oven you will need to loosen the orifices approximately 1 1/2 to 2 turns and close the air shutters on the burner to about 3/4 way open. You will also need to flip the cap on the regulator from LP to Natural. The orifice needed for the top burners will be for the Right front 316237900, right rear 316237903, left front and left rear 316237902. Read More...
Steve May 28, 2017 for Model Number LGGF3043KF I need a LP conversion kit for this model. which one do I need? The one that pops up, says its not compatible when we put in the model number. Thanks
1 Answer Steve, The GRLP3 / GRLP3 LP CONVERSION KIT is the correct LP Conversion Kit for the model number you supplied. The APP Compatibility Tool doesn't always have the correct information. The part is in stock and available at this time. Thanks, Read More...
Sandy C. March 29, 2017 for Model Number FGF3---S- I have a Frigidaire natural gas range and want to convert it to LP but the model number is rubbed off so I can only make out part of it. I have the serial VF51117652, the model FGF3 then some spaces then either a B or a P, then an S then another letter I think. Is there any way you can look up the serial number and tell me what conversion kit I need. Thanks
1 Answer Hello Sandy, I'm sorry but there are about a thousand models that come up with that model number beginning. You may be able to shine a flashlight on the units' I.D. tag to make out the impressions where the number had been typed. Unfortunately, we do have to have the model number to advise what conversion kit will work properly and safely on you unit. Thank you for your patience and understanding in this matter. Read More...
Doug March 23, 2017 for Model Number FFLG4033QW1 Is the same conversion kit used for the washer dryer combo as the range?
Ron R March 17, 2017 for Model Number FRIDGIGAIRE glgf366abc I need conversion kit from lp propane to natural gas. I need part number. Thank you
1 Answer Ron, You will need to replace the orifices for the right front 316237901 and for the right rear, left rear, and left front 316237902. For the oven you will want to loosen the orifices 1 1/2 to 2 turns and close air shutter to approximately 3/4 way open and flip the cap on the regulator. Read More...
James March 12, 2017 for Model Number FGFLZ87GCE I need to convert my range and oven back to natural gas . What parts do I need. Do I need to change the regulator or just turn the cap around and adjust the oven gas flow
1 Answer James, For the regulator you would just need to flip the cap from LP to Nat. For the oven you would need to loosen the orifices 1 1/2 to 2 turns and then close the air shutters on the burners to about 3/4 way open. For the top you will need the orifices. You will need for the right front 316430500, right rear 316237903, center and left front 316237902, and left rear 316237901. Read More...
Shaina February 15, 2017 for Model Number LGGF3042KFR We recently converted our unit to propane, but only worked on the burners. The oven is still not correct. Is there another conversion I need to buy or is it an adjustment?
1 Answer Hello shaina. You will need to flip the regulator to LP and adjust the oven orifices to convert them. You will tighten them down until they bottom out. Do not over tighten them. Read More...
Hoi H February 05, 2017 for Model Number FGF337ECC I have Frigidaire Model FGF337ECC and Kit GRLP4 The nature gasorfices are 54-154-154-175 , they not shown in Orfice Data Chart on the Instruction Book. My question is what number of the LP orfices I should have use? Thank.
1 Answer Hoi H, The part number for the LP kit on your unit would be GRLP3 and you will want to make sure that you have the correct part. Read More...
Carlos S January 23, 2017 for Model Number FPGH3077RFB Got a conversion kit to LPG included with the gas range and was able to convert the top burners. Unfortunately the oven I'm having problems with, after inverting the CAP of the pressure regulator and adjusting air shutter, it says on the instruction sheet that I have to replace the Orifice hood gas spud to the 1.59(#52)? What is the exact part number and where I can order it. I have to replace both burners top and bottom...right? Please help me here. Thanks
1 Answer Carlos, If you look on the side of the orifices there would be a number there. The unit should have come with one that would go to the oven and most likely just for the broiler. If it was not with the kit then you would need to get the kit part number 808695309. Read More...