Daphne January 26, 2015 for Model Number FGF366CQC What parts do I need to convert stove back from LP to Natural Gas. I know that orifices probably need to be changed for the stove burners but what about the oven?
1 Answer Daphne, The parts that you would need for your unit would be the top burner orifices which would be as follows. The Right front burner 316237900, the other 3 burners will take orifice part number 316237902. For the oven burners you would loosen the orifice 1 1/2 to 2 turns and close the air shutters on the burner to about 1/4 way open. You would need to flip the cap on the regulator from LP to Nat. Read More...
Audrey December 20, 2014 for Model Number ffg3013zwa I need to know what model conversion to lp kit I need for a Frigidaire stove model ffg3013zwa? Also, is this conversion done through the pressure regulator?
1 Answer Audrey, I've found model FFGF3013ZWA. The LP conversion kit listed for your model is part number GRLP3. You'll need to flip the regulator to LP. Thanks. Read More...
Marvin December 13, 2014 for Model Number 79078511403 I too am looking for a conversion kit from lp to natural gas for a Kenmore model 79078511403. Do I just need orifices for the stove burners or is there an orifice in the oven? How do you tell which way the tip should go in the regulator behind the drawer as shown in the video (which way is lp and which is natural gas)? Thank you.
1 Answer Marvin, For the conversion from LP back to Natural gas, the regulator pin will have a LP or NAT on it in which you will want to see the nat when it is installed. For the oven you will need to loosen the orifices by 1 1/2 to 2 turns and adjust the air shutters on the burner to about 1/4 open. For the top burners you will need to replace the orifices individually. Based on your unit it appears that all the burners use the same orifice which is part number 316237902. Read More...
Dr Sue November 22, 2014 for Model Number Frigadaire LGGF3043KFS What converter kit do I use to convert to LP GAS?
1 Answer Hello! To convert the given model to LP you'll need conversion kit part number GRLP4. Thanks! Read More...
Mike November 09, 2014 for Model Number LGGF3033KWE Converted this model from NG to LP with your kit..All 5 burners work great but oven and broiler both have yellowish flame even with air opened all the way,yes I did turn the 1/2 nut till it bottomed clockwise..Hope you can help..Thanks
1 Answer Mike, You may need to fine tune the air shutters. They do not have to be open all the way and it may be causing too much air to get to the burners and causing a unclean burn. Read More...
Steve November 09, 2014 for Model Number tappan tgf351esg What conversion kit do I need to convert a tappan tgf351esg to propane?
Kristy October 29, 2014 for Model Number 79074503992 I have this Kenmore Elite gas stove with electric convection oven. I need to convert it from Propane back to Natural Gas. Do you have parts and instructions?
1 Answer Kristy, to convert the unit back to NG you'll need the tubing. For the left front use part number 318167716, right rear use part number 318167706, right front part number 318167715, left rear part number 318167713 and center use part number 318167712. Thanks. Read More...
Michelle October 20, 2014 for Model Number GLGF388CSB Also converting from LP to NG. Model number GLGF388CSB. What will I need to purchase and where can I get one?
1 Answer Michelle, you'll need the NG orifices to convert back to NG. The 12k orifice is part number 316237901, 14k orifice is part number 316237900, 5k orifice is part number 316237903, and the 9.5k orifice is part number 316237902. Flip the regulator back to NG and adjust the oven orifice. Thanks. Read More...
Bobby B October 18, 2014 The conversion kit has color coded orefices , please, need to know the correlation. Is the 9,500 Brown, red, white, pink , yellow etc? Which color is 17,000 btu.
Jon Flebotte October 16, 2014 for Model Number BGGF3042KF Which propane conversion kit do I need for this range? Thank you for your help.