1 Answer Dorothy, to convert your unit to LP you'll need conversion kit part number GRLP4. Thanks! Read More...
Ludovico P July 21, 2014 for Model Number FGF337AWE Burners number to convert my range from propane to natural and the cost?
1 Answer Ludovico, For the oven burners you will only need to adjust the orifices by loosing them approximately 1 1/2 turns and closing the air shutters to about 1/4 of the way open. On the regulator there will be a cap that is set for LP that would need to be flipped to nat. For the top burners you will need to get the following orifices, Right front burner, left rear and right rear 316237902, left front burner 316237901 Read More...
Charles H. July 18, 2014 for Model Number Frigidaire FGGF3042KFE is there a Conversion kit for Frigidaire FGGF3042KFE from LP to Natural or what do i need?
1 Answer Hello Charles! To convert the burners you will need to purchase the following parts. For the right front burner you need 316527509, right rear 316527504, left rear 316527511 and the rest of the burners use 316527500. The oven valve orifice will need to be turned 2 1/2 turns counter clock wise up and the regulator needs to have the cap turned to NG. Thanks! Read More...
Brian July 15, 2014 for Model Number Frigidaire Stove #FGF366CSC What kit do I need to convert natural gas stove to use with LP gas?
1 Answer Brian, to convert the unit to LP you'll need conversion kit part number GRLP3. Thanks! Read More...
Jack July 15, 2014 for Model Number Frigidaire DGGF3042KFK What is needed to convert stove and oven from LP gas to natural gas? Thanks.
1 Answer Jack, you'll need two 9.5k burner orifices part number 316527500, one 14k burner orifice part number 316527511, one 5k burner orifice part number 316527504, and one 17k burner orifice part number 316527509. Flip the regulator back to NG and adjust the oven orifices orifice two full rounds ccw and adjust the burner flame until its blue. Thanks! Read More...
Smarten July 14, 2014 for Model Number GE JGB920SEF2SS Trying to convert this GE stove from NG to LP. Conversion kit is not in the guts of the stove. Have an existing Montgomery Ward/Frigidaire 285640A stove already converted to LP. Can I use the orifices from the Montgomery Ward on my GE and if so, which orifices where? The GE states I need 9,100 BTU each at the left front and rear burners, 5,200 BTU at the right rear burner and 11,000 BTU at the right front burner. Otherwise it's $63 for a GE conversion kit. Thanks in advance
1 Answer Hello! To convert this unit from NG to LP you will have to purchase part number WB28K10569. This comes with all orifices needed to convert it, we are unable to advise you if the current LP orifices for your M.W unit will work with your G.E unit. Thanks! Read More...
1 Answer Hello Clif! The correct conversion kit for the model number supplied is part number GRLP3, thanks! Read More...
Amy July 07, 2014 for Model Number Tappan Model#TPF303BWA I am needing to convert this Tappan stove from LP to natural gas. I have looked for conversion kits, but cannot find one for this particular brand/model. Do you have the part needed for this?
1 Answer Amy, the unit does not require a kit or orifices to be changed. The unit is self convertible. You'll need to flip the regulator to NG and adjust the orifices two full rounds ccw and adjust the burner flame until its blue. Hope this helps you, thanks. Read More...
John T July 04, 2014 for Model Number Ducane Grill Good morning and Happy 4th. I have a Ducane grill I am converting FROM natural gas TO propane and need four orifices; they are very small. Each should provide about 12,000 BTU. I am having trouble finding them. I don't mind drilling out a blank if you have those. If not, can you guide me elsewhere? Thanks
1 Answer John, Unfortunately we would not have any parts or information on Ducane grills. Read More...
Suzi June 26, 2014 for Model Number PLCS389DCB My gas stove is currently on NG and need to convert it to LP. What do I need?