David September 03, 2013 for Model Number FGF 366 DCC What LP conversion kit do I need for a Frigidaire range FGF366DCC?
Jw August 30, 2013 for Model Number Frigidaire FESL67EDG Which nat gas to LP conversion kit do I need for Frigidaire FESL67EDG?
1 Answer JW, By the looks of the model this sounds like a Slide in electric range. Please verify the model number and post your model number with a new question on the parts page. http://www.appliancepartspros.com/modelnumber_locator.aspx Read More...
Larry Larry August 27, 2013 for Model Number LGGF3043KFR HOW TO REMOVE NG ORFICES TO INSTALL LP ORFICES , NO SCREWS TO REMOVE TO ACCESS ORFICES ONLY HOLE DOWN CENTER OF BURNER .
1 Answer Larry, When you remove the cap from the burner and look into the hole, you will use a nut driver or a socket and stick into the hole to remove the orifice. You will want to use a piece of electrical tap to have the orifice stick to the tape so it does not fall back down into the unit. Read More...
Javier August 22, 2013 for Model Number PLGS389ECF Which nat gas to LP conversion kit do I need for Frigidaire PLGS389ECF?
1 Answer Javier, to convert your appliance to LP you'll need conversion kit part number 318186909. Thanks! Read More...
1 Answer Hello Anna! We have the GRLP3 kit available for purchase. You may add the item to your cart to check out online, contact our online Live Chat support group, or give us a call at 1-877-477-7278. Thanks. Read More...
Jon D. August 12, 2013 for Model Number fgf337ecd I recently bought a house with a frigidaire range that was set up for propane, I have now converted to natural gas. What parts do I need to change to make this range work on natural gas?
1 Answer Jon, you'll need three top burner NG orifice part numbers 316237902 and one NG orifice part number 316237901. Thanks! Read More...
Marcos A August 05, 2013 for Model Number FRIGIDARE STOVE BGGF3042KF Good morning my question is , I took this stove overseas and in my country we are using Lp gas. We need a Lp conversion kit. The technician in my country removed little valve with some numbers like 146, 187, 146, 107, 210. If I purchase the kit how we know how to install the number on the stove. Now the stove has yellow flames.
1 Answer Marcos, When you receive the LP conversion kit, it comes with instructions that tell you how to install the kit. Read More...
Alfredo August 02, 2013 for Model Number LGGF3042KFN What kit do I need to convert to Lp gas. And do I need to flip over the regulator? Thanks
1 Answer Alfredo, The part number for the LP conversion kit for your unit is part number GRLP3. Read More...
Eric July 25, 2013 for Model Number CGGF3056KF What is the conversion kit associated with this model? Is it the GLRP3 or the GLRP4? I currently have a GLRP4 kit and was wondering if it was ok to install it. Thanks.
1 Answer Eric, The Conversion kit for this unit is part number GRLP3 and you would not be able to use the GRLP4. Read More...
Mario July 24, 2013 for Model Number ffgf3015lmd I converted it to lp but oven flame is too high. How to adjust it?
1 Answer Hello Mario. Tighten the orifice all the way down, then loosen 1 round and check flame and adjust accordingly. Read More...