Aaron December 11, 2021 for Model Number Frigidaire Electrolux Pro Series I was replacing the flooring in my kitchen. When I went to move my stove, I barely touched the power cord and it sparked from the back of the stove. When I went to plug it back in and turn it on, everything seems to be working fine (gas flows, display lights up and activates correctly for the oven), except the igniter no longer clicks, so it won't start a fire on the stove or in the oven. The numbers on the control module are: Modele : MEM-D-002 Part #: 318239701 Date : 10.03.2005 Do I need to replace the entire control module or is there an igniter control that I can replace? Or is there come other problem that I'm not aware of?
1 Answer Aaron, if the model number of your appliance could be provided in a new question, this will allow the most accurate information to be presented. Read More...
Michael October 03, 2019 for Model Number PLCS389DCB When turning stove to bake 400 the broiler unit was on high. I can not get bake element to work.
1 Answer Michael, if the broil element is cycling on and off every minute, then the bake element 318255006 can be tested for resistance and should measure 19 ohms. If the broil element is coming on immediately after starting a bake cycle, and the temperature reading is accurate, then the main control 316272206 has failed. If the temperatures are not accurate, then the oven sensor 316217002 will need to be tested and should measure around 1100 ohms of resistance at room temperature. The main control is not supposed to start using the broil element until the oven temperature has reached the programmed temperature. Read More...
D Powell April 13, 2019 for Model Number Frigidaire Electrolux CPCS389DC2 Dual fuel range Hello I have replaced the clock timer but the flex ribbon cables were also damaged when the original timer failed. What is the part number(s) for replacement flex ribbon cables?
1 Answer Hello, unfortunately the ribbon is part of the control panel and the manufacturer has discontinued the control panel. They also did not supply a suitable replacement to take it's place, sorry! Read More...
Kateor April 09, 2019 for Model Number AP3563569 We have a crack over the number/degree display and a fragment of the plastic has broken off. Do you recommend anything to fix just the plastic? We aren't having issues with anything else on it. Is this part the only way to fix the crack? Thanks
1 Answer Hello Kateor, We are not aware of any type of fix for the display except for replacing the part. Thank you for your patience and understanding in this matter. Read More...
Fred H. April 22, 2016 for Model Number PLCS389DC My Frigidaire dual fuel stove was working fine, and suddenly it started beeping, and displayed Error code F1. I turned off power, but it came back after power up. I researched and found the error could be the oven probe or the control board. I measured the probe resistance, but it looked to be almost opened (20Mohm). It seems unusual that my oven temperature was working just fine. I have ordered a new probe, but if that doesn't fix it, do I replace the control board next? Is the control board included with the control panel? Thanks
1 Answer Hello Fred, The temperature probe should correct the issue since it reads such a high resistance. If it were to still have the issue, the harness that connects the temperature probe to the control board and the control board are the next suspects. Read More...
Harry S. February 07, 2014 for Model Number PLCS389DCB Membrane keypad stopped working. The clock still displays. PF displays when unplugged. No error codes. I replaced the control board, but that didn't make any difference. Some of the key pads will activate some random functions when pressed in combination with another key pad. I can get it to program the time, but nothing else will work. The only thing I can think of is that the mambrane keypad itself is bad.
1 Answer Hey Harry. If the control board did not solve the problem, then the most likely cause would be the control panel. Part 318239701 is the correct panel for your model. Read More...
Carlos November 23, 2013 for Model Number Frigidaire PLCS389DC 30 The cleaning lady sprayed some cleaning liquid on the panel and erased most of the writing from the stainless panel. Is there a way just to get the stainless control panel?
Carlos November 23, 2013 for Model Number Frigidaire PLCS389DC 30 The cleaning lady sprayed some cleaning liquid on the panel and erased most of the writing from the stainless panel. Is there a way just to get the stainless control panel?
2 Answers Hello Carlos, I'm sorry but the only way to get this panel 318239701 is as it is shown, as an assembly. Read More...
Jeri V. October 27, 2013 for Model Number PLCS389DCC A repairman was putting the front panel back on after replacing the glass top on my stove and use a tool that scratched several places on the stainless steel part of the panel. Although I know it was an accident, it is noticeable. Is there so way to fix that without replacing the whole panel? Thanks in advance
1 Answer Jeri, you can try the scratch b gone kit part number TJDW-SBG-HK. This kit can restore the original appearance and finish of scratched or scuffed stainless steel surfaces. Thanks! Read More...
Bill July 03, 2013 for Model Number plcs389dcc The temp in the oven will not regulate down. It burns the food. I replaced the prob Still not working. Do I need a new controle board?
1 Answer Hello Bill. Yes, if the probe is new, and you still have the issue, you will need to replace the board in the unit. Read More...