Customer Questions and Answers for Gas Conversion Kit (Assembly) by Ge

Michael, the left front WB28X20607, left rear WB28X21953, center WB28X20618, right rear WB28X21954, and right front WB28K10812 orifice holders would be used on the main top. For the oven sections, the upper oven will use the orifice elbow WB28X20787 and the lower oven will use the broil elbow WB28X20619 along with the bake elbow WB28X20451.

Michael, the left front WB28X20607, left rear WB28X21953, center WB28X20618, right rear WB28X21954, and right front WB28K10812 orifice holders would need to be replaced on the main top. For the oven sections, the upper oven will need the orifice elbow WB28X20787 and the lower oven will need the broil elbow WB28X20619 along with the bake elbow WB28X20451.

Kathy,

Unfortunately, we are unable to pull up parts for this model because it appears to be a Canadian model. Normally with these units, you would need to get the burner tubes because they will have the natural gas orifices on them since there is not an LP to Natural kit.

Allen, the center orifice holder WB28K10289, right-front orifice holder WB28K10812, left-front orifice holder WB28K10813, left-rear orifice holder WB28K10815, and right-rear orifice holder WB28K10817 would be needed. To convert the oven orifices, rotate them counterclockwise 2 1/2 turns and with the gas supply valve turned off, remove the regulator cap to flip the regulator pin upside down.

DD,

For the bake and broil burner, you will loosen the orifices 1 1/2 to 2 turns and then close the air shutter to where it is about 3/4 of the way open. For the top burners you will need the following orifice holders, Right rear WB28K10023, left rear WB28K10022, right front WB28K10030, and left front WB28K10029.

Hello G,
the Lp conversion kit for your model is part WB49X26658.

Mary N,
Based on the model provided the part needed are as follows:
WB28K10812
WB28X20607
WB28X21953
WB28X21509
WB28X21954
WB28X20389
WB28X26089

Layla,

You will need to get the burner tubes for the top which will be for the left front WB28K10210, left rear WB28K10211, right front WB28K10209, and right rear WB28K10212. For the oven you loosen the orifices 1 1/2 to 2 turns and the air shutters on the end of the burner will be about 3/4 of the way open.

Diego,
For conversion back to natural gas you would need the burner tubes that come with the natural orifices in them, see the following list.
WB28T10269
WB28T10277
WB28T10268
WB28T10272 - This part has been discontinued by the manufacturer and is no longer available.
WB28X29273

Hello Tim,
unfortunately, the model number given is showing as an invalid model number, please recheck the model number and repost your question so we can find the parts needed.