Maria November 29, 2017 for Model Number Rgb530deh2ww I need a converting kit from normal gas to propane for this midel please...
2 Answers Maria, You will need 2 of [wb28K10023] for the 2 left side burners, 1 of [wb28K10834] for the right rear burner and 1 of [wb28K10032] for the right front burner. The oven you would tighten the orifices to snug and open the air shutters. On the regulator you will need to flip the cap on the regulator. Read More...
Bryan October 11, 2017 for Model Number RGB530DEH1WW Is a conversion kit from LP to Natural available for this model Thank you
1 Answer Bryan, There is not a kit that would have the NAT orifices in it. You would have to get the orifice holders for this. The part numbers would be Right rear WB28K10187, front right will be WB28K10803, front left orifice holder WB28K10190, and left rear WB28K10188. Read More...
Brett June 15, 2017 for Model Number GE model JGBS18DEN4WW performed the conversion from NG to LP, everything works great but the oven, i have 4-6 inch flames, 1/2 yellow, flames coming out bottom of oven, shutter was turned to LP setting, it has a adjustable orifice? never seen one before?
1 Answer Brett, You will need to tighten the orifice down about 1 1/2 to 2 turns. This should correct the issue with the flame. Read More...
Mark June 06, 2017 for Model Number JGBS19DEN5WW We have a GE stove that we are converting from LP to NG, M# JGBS19DEN5WW S#ST113309P. What is needed?
1 Answer Mark, You would need to get the burner tubing for the left rear WB28K10188, right rear WB28K10191, left front WB28K10190 and right front WB28K10192. For the regulator you will need to flip the cap from LP to Nat. on the bake and broil you will need to loosen the orifices 1 1/2 to 2 turns and close air shutter to about 3/4 way open. Read More...
Brian August 31, 2016 for Model Number jgbp28bek3wh i need a conversion kit from propane to natural gas ,for the GE stove . thanks
1 Answer Brian, Unfortunately there is not a conversion kit for going back to natural gas. You would need to get the burner tubes part numbers Front left WB28K10190, left rear WB28K10191, right front WB28K10192 and right rear WB28K10188. The oven you would loosen the orifices 1 1/2 to 2 turns and close air shutters to about 1/4 of the way open and flip cap on regulator from LP to NAT. Read More...
Ken Freedman October 31, 2015 for Model Number jgbp28dem7ww Which orifices do I need to convert this range back to natural gas?
1 Answer Ken, In order to convert this unit back to natural gas, you will need to loosen the orifices for the bake and broil approximately 1 1/2 to 2 turns. Close the air shutter on the burner to about 1/4 way open. Flip the cap on the regulator from LP to NAT. On the top burners you will need to replace the orifice holders which will be right front WB28K10189, right rear WB28K10187, left front WB28K10217 and left rear WB28K10188. Read More...
Buck M September 04, 2015 for Model Number JGBP25SEN1SS I need to convert from propane to natural gas. Do you have a conversion kit for this?
1 Answer Hello Buck. You will need to order all 4 orifice holders WB28K10188, WB28K10191, WB28K10190 and WB28K10192 for the natural gas orifices. Read More...
Lex Dison January 03, 2012 for Model Number JGBP28WEJ1SS I need an LP conversion kit is the conversion kit AP4368112 what I need to covert this Gas Stove to LP Also, do I need something else to covert the oven?
1 Answer Hello Lex. Yes, WB28K10555 is the correct conversion kit and is all you need to convert the unit. Hope this helps. Read More...