Jeff January 07, 2018 for Model Number WSM2700DAWWW Space Maker Washer Washer has over filled. Does not matter which level setting. Have to manually turn off water to stop filling. The switch needs to be moved manually to advance the cycle. I am sure the switch is compromised. I wanted to know if the switch also controls the water fill level. If so, what is the part number, is it in stock and do you have a schematic available for removal of the old and replacement.
1 Answer Jeff, You will want to check the pressure hose to make sure that the hose is not clogged. If it is not then this will most likely be a pressure switch that is faulty and will be WH12X10083. Read More...
A July 05, 2017 for Model Number WSM2700DWW Can't seem to find the exact replacement dryer timer knob. Can you recommend a model/part number that will work? Thanks.
Dennis July 04, 2015 for Model Number WSM2700DAWWW Does not Drain. Installed new pump and made sure all lines were clean and clear of anything. Everything else is working normal.It seams I do not hear when the pump should click on,could this have to do with the timer?
1 Answer Dennis, You will want to check the pump to see if there is 120 vac getting to the pump when the unit calls for the drain pump to come on. If there is power to it then replace the pump. If it does not have power then the timer would be the issue. Read More...
Chris April 20, 2014 for Model Number WSM2780HDWWW The dryer timer knob is stripped and needs a replacement. The timer works just fine. Can I purchase just the knob?
D.Truelove January 08, 2014 for Model Number wsm2700wcww This is a combo washer and dryer. Sometimes the dryer heats up most times it don't. I have clean all lint pipes and filter. Thanks
1 Answer Hello d.truelove. Look for bad wiring on the unit. If none is found, then check the element and see if it is bad in the unit. Read More...
Newmond F June 04, 2013 for Model Number wsm2700dawww How to remove the washer timer knob on the GE wsm2700dawww.
1 Answer Newmond, You will need to access the back of the timer to remove the knob. On the back of the timer there is a hole with a stem in it. You will need to pull the stem out using a small flat blade screw drive. Once the stem is out pull the knob off and put new knob on. Push stem back in. Read More...