Keith January 02, 2018 for Model Number JTP56WW2WW Control shows working but lower broil element does not come on with bake or broil. Lower element works Eventually ovens lose all power until cools down.
1 Answer Keith, You will want to check to make sure that the element shows continuity. If this has continuity then the issue will most likely be a control board that is faulty and will need replaced. The part number for the control board is WB27T10277. Read More...
Charles May 30, 2014 for Model Number JTP15BW Bake program cancelled and returns to time of day and Locked Door light flashes when bake temperature reaches about 375-400 for more than 10 minutes. Fan assembly recently replaced with genuine part. Upon holding open gas range top and removing component compartment top, problem does not occur. Bad Fan Limit Switch, Thermal Limit Switch or Control Panel? I don't have testing meter.
1 Answer Charles, The fan limit switch would be the most likely cause if the fan is not coming on to cool the unit. Read More...
Engineer February 02, 2014 for Model Number GE JTP18BWBB Is this part the RESETABLE thermal limit switch? I would assume so since it is more costly than the "other" one and the purple dot in the photo suggests that. Ref Part AP2024030.
1 Answer Hello! No, the limit switch WB24K5127 nor is limit switch part number WB24K5126 resettable. They both should read closed for continuity. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. Hope this helps. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
Greg August 06, 2011 for Model Number JTP13GDv2BB I keep getting an F3 Code, which says I probably need to "replace the oven sensor". I've been looking all over the diagrams and this is the closest part I can find - is this limit switch the same as an oven sensor?
1 Answer Hello Greg! No, the limit switch WB24K5127 is not the same as the oven sensor assembly. For the oven sensor use part number WB23X5340. Thanks! Read More...
1 Answer Hello Arthur. Unfortunately we don't have the specs for this limit switch, but we can assure it is compatible with your model number. Hope this helps Read More...