Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Customer Questions and Answers for Control Panel by Ge

Best Seller
Manufacturer Part
4.89 (64)
By: Ge
Part Number: OEM9558387
Manufacturer Part Number: WB36T10398

This is a control panel with touchpad that is used on several wall ovens by major manufacturers. It sits on top of the oven and provides the user with important information and functions. This appliance part has a small screen and a series of buttons to carry out cooking and cleaning options for the oven. Over time, the control panel can be damaged or malfunction and no longer work correctly. The buttons may not register, the screen may not show information, or the oven may stop working correctly.If the control panel with touchpad isn't working, it will need to be replaced. Work gloves and basic tools will be needed for the process. Make sure the oven is unplugged and the gas is turned off if applicable. Use the tools to remove the screws from the control panel so it can be removed. A series of wires will need to be detached before installing the new component.This control panel is designed as a replacement part for wall ovens made by Kenmore and General Electric. The component is sold as a single item. This is a genuine OEM replacement part that is sourced directly from the manufacturer.

More

Questions & Answers

For Ge Control Panel (Part Number: OEM9558387)

1 Answer

Richard,

The first thing to check would be to make sure that the door switches are good and make sure that there are no damaged wires. If this is good then the control board would be the most likely cause for this issue.

Read More...

1 Answer

Stan, based on the information provided, this is going to be a failure in the broil relay of the oven control WB27T10272. Unfortunately, the manufacturer has discontinued this item and it is no longer available.

Read More...

1 Answer

Elsa,

This issue will most likely be caused by a control panel that is faulty and will need to be replaced.

Read More...

1 Answer

Hello John,
You would need to replace the control WB27T10305 which shows to have a stuck key. I'm sorry but this part has been discontinued by the manufacturer and no satisfactory substitutions have been provided. The only thing you can do in this case is contact a company like Corecentric Solutions 866-737-2244/ corecentricsolutions.com and ask if they support board WB27T10305. If so, they can repair the board for you. Thank you for your patience and understanding in this matter.

Read More...

1 Answer

TPA, You're correct, the F7 error code indicates an issue in the keypad matrix on the control panel. "Control Panel Access
1. Disconnect the power and open the oven door. 2. Remove 3 screws from across the bottom of the control panel. 3. Push up on the control panel assembly to release the top catches." Once you have the control panel dismounted, you want to label any wires you disconnect from the control, then lay the original panel on a cloth on the table. Unlock the keypad ribbon retainer and remove the ribbon, remove the four mounting screws holding the control to the panel. Set the old panel aside, reverse the procedure and reapply power to the oven and test for error codes and operation.

Read More...

Have questions? Ask our pros!

Contact us in a way that is convenient for you

Call us 1-877-477-7278
Need Help? Chat with a Pro
Or ask a question by filling in the form

Share your thoughts with other customers

Ask a Question
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google