Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Customer Questions and Answers for Slide, Drum by Ge

Best Seller
Manufacturer Part
4.89 (64)
By: Ge
Part Number: OEM6127653
Manufacturer Part Number: WE03X10001

The Drum Slide is an OEM replacement part for GE clothes dryers. It supports the front of the dryer drum, allowing it to rotate smoothly and quietly. Made of durable materials, this component reduces friction as the drum spins, ensuring that the appliance operates with minimal noise and wear.

Causes for a malfunctioning Drum Slide can include wear and tear from the constant rotation of the drum, accumulation of lint or debris causing friction, or damage due to overloading the dryer may also disrupt slide movement quality over time.

Symptoms of a faulty drum slide include:

  • Noisy or off-balance drying
  • Excessive drying times from inadequate tumbling action
  • Premature wear of bearings and drive components due to slide friction issues

This GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

More

Questions & Answers

For Ge Slide, Drum (Part Number: OEM6127653)

Gary for Model Number DSXH43GA0W

We are replacing the WE03X10001 dryer drum glides on felt and we don’t know which way to glue it on. Ours was so worn, there was nothing left hanging over the felt and one plastic glide was missing completely. Is there a diagram of which way to glue it on? Secondly, we are also replacing the bottom front felt. It is thinner from top to bottom than the felt on the glides, is that correct and okay that there is such a difference in thickness? Thank you for your help! GDR

1 Answer

Gary,
Based on the information provided the glide placement is approximately at the 12/10/2 positions, sorry we don't have a video on this part at this time.

Read More...

1 Answer

Hello jeng114.
Kit WE03X10001 does not come with instructions. You simply pull off the old felt and use the adhesive to install the new one in its' place. Be sure to let the adhesive set up for about 24 hours before running the unit.

Read More...

1 Answer

Hello Matt. Check and see if it part of the inner drum and you will need to replace the drum. Or it is part of the front panel and you will need to replace the front panel.

Read More...

1 Answer

Harry,

You will want to pull the front off the unit and check the front bearing glides and check the front felt seal to make sure that it is not damaged. This is the area that the clothes would get caught in. Also make sure that the dryer is not being overloaded as that can cause the same issue.

Read More...

Have questions? Ask our pros!

Contact us in a way that is convenient for you

Call us 1-877-477-7278
Need Help? Chat with a Pro
Or ask a question by filling in the form

Share your thoughts with other customers

Ask a Question
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google