Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Customer Questions and Answers for Switch Pressure by Ge

Best Seller
Manufacturer Part
4.89 (64)
By: Ge
Part Number: OEM11651958
Manufacturer Part Number: WH12X10322

Questions & Answers

For Ge Switch Pressure (Part Number: OEM11651958)

1 Answer

Andy,

For this issue if you have to reset the pressure switch then look for a clogged air dome or pressure hose. If this checks ok then the issue would most likely be caused by a pressure switch that is faulty.

Read More...

1 Answer

Hello Segun, you'll want to remove your front panel by releasing the two snap clips located underneath the top of your washer. Once you've removed the front panel you'll see your motor, you'll be looking for a blinking light. If you can count 4 rapid blinks and a pause, the machine has detected an error with the mode shifter. Please call us at 877-477-7278 for further assistance, thanks!

Read More...

1 Answer

Hello Paige,
If the motor light was flashing 4 times with a one second pause between flashes, the mode shifter WH38X10017 should be checked. If the mode shifter has an issue, the motor will normally be fine. If the mode shifter code is flashing, the issue will not be the pressure switch.

Read More...

1 Answer

Hello Frank. Check the screens for clogs. If none is found, replace the water valve in the unit.

Read More...

Have questions? Ask our pros!

Contact us in a way that is convenient for you

Call us 1-877-477-7278
Need Help? Chat with a Pro
Or ask a question by filling in the form

Share your thoughts with other customers

Ask a Question
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google