Francisco R March 22, 2019 for Model Number JB400SP5SS Would a broken switch rocker element keep the dual burner element from turning ,or is the control switch be bad too?
1 Answer Francisco, If the burner is not coming on at all then you would want to check the infinite switch to see if it has 240 vac coming from it to the elements. If it does not then the switch is bad and if there is then the burner would be faulty. If there is only the inner element that is working then this would be a possible rocker switch that is faulty. Test the switch for continuity and if it checks ok then the issue will be the element that is faulty. Read More...
Robert April 26, 2017 for Model Number JBP66WK4WW My GE Electric Range is not pre heating properly? never preheats to set temperature. The Broiler seems to work, I think both heating elements are o,k,.???
1 Answer Robert, The pre heat cycle on an oven will have erratic temperatures in the beginning. It takes approximately 15 to 20 minutes for the oven interior and temperature to "temper" and produce a consistent temperature. In your range on the bake selection, the elements alternate between the bake and broil elements on approximately a 50 / 10 cycle rate (bake 50 sec./ broil 10 sec.) But sounds like all is OK at this time. Thanks, Read More...
Michael August 05, 2015 for Model Number JPB66DM2WW My range control board has no lights on display (clock, timer etc.) I have checked the power to the board and it does have correct power. All the burners do operate but nothing in the oven due to the display not coming on.
1 Answer Hello Michael. That indicates the control board WB27X45466 is bad and will need to be replaced on the unit. Read More...