David April 19, 2015 for Model Number DWXR463EG0WW Dryer will only run if you hold start button in. I replaced the start button and it does the same thing? Could the problem be the timer?
1 Answer Hello David. Based on the information you provided, the motor is bad and will need to be replaced on the unit. Read More...
1 Answer Felicia, We presume you mean the drum light WE05X20431. The circuit to the light bulb and socket is controlled through the door switch WE4M415. When the door is closed, power is routed down to the motor, so the dryer runs. When the door id open, the power is routed to the light bulb and the light illumintes. Read More...
Reggie C. February 08, 2012 for Model Number EED5600GWW I spoke with your salesperson. The part number he gave me is WE4M377. The timer recommended has a number on the back right side that is 67500. The actual part in my dryer has the number 67460 and has an additional connection at the top. Do you carry the part with the required number of connections?
1 Answer Hello Reggie! To verify which timer is used on your EED5600GWW model we will need the missing digit between the G and WW. You model should look something like this; EED5600G0WW, EED5600G7WW, EED5600G3WW, etc. Please obtain this information for further assistance. Thanks! Read More...
Paul November 13, 2011 We keep cracking the plastic control knob because the timer shaft is too difficult to turn. Do we need to replace the timer unit?
1 Answer Hello Paul. Yes, if the timer is hard to turn, and keeps breaking the knob, you will need to replace the timer WE4M377. Hope this helps. Read More...
Moses May 23, 2011 for Model Number DRSR483EG5WW The plastic shaft on the timer is worn. Is it necessary to replace the complete timer or can is it possible to replace the shaft with replacing the entire timer unit?
1 Answer Hello Moses. You will need to replace the complete timer WE4M377. Hope this helps. Read More...