Jason December 09, 2020 for Model Number GSC309PVS00 I have a GSC309PVS00 wall oven/microwave combo. A couple weeks ago we experienced a loud electrical buzzing noise when trying to operate the microwave. The buzzing lasted just a moment. Ever since then, the display now shows a "Door" error code when attempting to operate the microwave. The oven still works fine. I had the three microwave door switches replaced and the error remains. Can you tell me what else may be causing this error code? I have noticed that the microwave light no longer comes on when the door is open. I know the bulb is good because I just replaced it a few months ago.
1 Answer Jason, This issue would most likely be caused by a faulty door switch. You would want to replace the door switches on the unit. Read More...
Schmiezing March 13, 2019 for Model Number RMC275PVB01 Whirlpool microwave combo rmc275pvb01, part #w10727408. Our microwave does not work and displays "door" when you push the start button. We had a repairman replace the two switches that the door engages, but it still didn't work. He said the problem is the left cam that the door pushes when closed and "readies" the microwave for action. Does your switch kit include the plastic parts that hold the switches and the cam that "readies" the appliance to turn on?
1 Answer Schmiezing, It appears that the manufacturer has discontinued the cam bracket and for this unit and there is no suitable replacement for it. Read More...
Holly August 17, 2016 for Model Number W10727408 I actually need the white switch holder not the switches. However, if they came as a package I would buy everything. Is this possible? Thanks!
1 Answer Hello Holly. We will need your model number to help you with this. Please call 1-877-477-7278 or post your model number with a new question on the parts page. http://www.appliancepartspros.com/modelnumber_locator.aspx Read More...
Jennifer October 22, 2015 for Model Number RMC275PDB1 Can I buy the switch holder without the switches? only the plastic part is broken, the switches are fine.
Moonlighter April 21, 2015 for Model Number GMC305PDS07 How do I get to the switch holder on each side?
1 Answer Moonlighter, In order to access the switch holders you will need to pull the unit out from installation and access from the sides of the unit. There will normally be a cover that is removed and then you have access to the holder. Read More...
Fred November 20, 2014 for Model Number GMC305PDB07 The microwave display panel displays the word DOOR when you attempt to start the microwave. What are the replacement part numbers I need to order and where can I get the instructions to replace the parts?? Also need to replace the oven inner door glass panel, can you give me the same info as requested for the microwave?? THANKs
1 Answer Hello Fred. You need to check the door switches W10727408 W10727408 and the latch on the door. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
Nick December 08, 2013 for Model Number KAW38AVM726 This is a kitchen aid microwave. When I push start it says "door". The repair person said I needed part 4375346. In your blog, however, it says I also might need 4375335 and 8204832. How do I tell? And is it difficult to unscrew and replace the part? How do I do about doing it? If it is complicated and time consuming, I will just have someone do it. Thank you very much. Nick
1 Answer Hello Nick. These are not easy to replace on the units but can be done. As to know which part is bad, you will remove the outer cover and inspect the latch and holder for breaks. If they are good, then it is the switches. Read More...
Don November 25, 2013 for Model Number rmc305pdb2 The microwave keeps on running when I open the door. Do I replace both switches and look for failed switch holders?
1 Answer Hello Don. You need to test the switches and see which switch is bad in the unit. Read More...
Jeff July 23, 2013 for Model Number RMC305PVS01 Part #8204832 shows the door switches with it. Do the switches come with that part or do I need to order the switches separately?
Jeff December 29, 2012 for Model Number KEMS308GSS1 The microwave will not turn on unless the upper corners of the door are pressed to activate both door switches. A door spring was broken, as well as a bad bulb. I replaced both springs and the bulb, but the door, when closed, will still not activate the switches. Could you please provide a procedure to access the switch holder? Thanks, Jeff
1 Answer Hello Jeff, Remove the two screws that go in from the top pointing toward the floor. Open the door and shift the air grille around until you manipulate it off of the unit. Remove the screw at the top, center of the control panel. Lift the control panel up and slip it off. There should be two screws in to left side which hold the switch assembly in position. You should be able to loosen these two screws and shift the assembly around a bit, even if it's one that has holes and not slots. If you cannot get enough adjustment from the slack, the switch holder assembly may have to be replaced. Read More...