Tom May 26, 2022 for Model Number LFXS30766S I replaced the water dispenser button assembly but now the panel will not light up. The fridge is running and cooling but the panel is out. How can I fix this?
1 Answer Tom, Double-check all your wiring. If the unit was working prior to disassembly then either you pinched a wire or something has been disconnected. Read More...
Michael January 26, 2021 for Model Number LFXC24726S The water dispenser button/plate sticks in the open position. I can stop the flow by pulling the button/plate forward. What is the best way to remove the dispenser button/plate so that I can clean the area behind it?
1 Answer Michael, To remove the dispenser, remove the drip tray, place your hand where the tray was, and push down and pull out and it should release the control panel to remove it. Read More...
Lynne N July 10, 2020 for Model Number LFX31925ST/00 What do the 2 springs needed on the water dispenser plate look like? We are renting and the last person must have broken the plate and glued it on. I ordered a new plate but did not know it needed springs. I understand that you cannot provide them for me but I don't know what they look like to order from somewhere else.
1 Answer Hello Lynne, the springs are MHY62603706 and MHY62603705, however, we have no information on how they attach to the rear of the lever. Read More...
Ellen June 03, 2020 for Model Number LFX31925ST/03 One of the tabs on our water dispenser button cracked, the button fell off and we lost the springs. I bought the replacement water dispenser button, but it didn’t come with new springs. What are part numbers for the springs and where exactly do the springs go?Any chance you can include a picture?
1 Answer Ellen, unfortunately, the manufacturer does not provide the springs separately from the dispenser display cover assembly ACQ85430239. Read More...
Jesse April 29, 2020 for Model Number LFXS29626S/01 The water dispenser button works fine and is not broke, it is however very loose. I took the button off and the “pegs” that are on the back of the button had only 1 coil spring. Is there supposed to be 4 or 2 and how do I order those springs?
1 Answer Jesse, there should only be one spring for the paddle. Based on the information provided, it sounds like the spring has weakened. Unfortunately, the manufacturer does not list it separately from the display cover assembly ACQ85430259. Read More...
John April 16, 2020 for Model Number LFX28968ST /01 The water button fell off and I can’t get it to go back on. What parts do I need to answer please?
1 Answer John, the water button MBG64843501 would need to be inspected to identify it the mounting tabs have broken or bent. If so, the button will need to be replaced. If not, then it is likely that the cover MCK62965301 has become brittle and opened up to where the tabs will not lock in. Read More...
Amy February 23, 2020 for Model Number LFXS30766S The water dispenser button on my LG fridge works, but it has completely fallen off. I can put it back on, but it doesn't have anything holding it on. Which parts would I need to repair this? Also, the plastic casing around the button and the rest of the water and ice dispenser is cracked. Would you recommend that I replace that too? Thank you greatly for your help!
1 Answer Amy, the dispenser cover MCK66542801 being cracked could be causing the water dispenser paddle ABH74219603 to not stay in place. However, if there are any broken tabs on the paddle, it would need to be replaced. Read More...
Phil February 17, 2020 for Model Number LG LFX31925ST/00 Both the water and ice lever/paddles have had the graphics come off and I want to replace them. Can I do this from outside? If so, how? Simply pull them off?
1 Answer Phil, the paddles have mounting tabs that would need to be pressed in. While this can be done from the front, it can be easier to do this from the back of the dispenser cover as it prevents the chance of damaging where the paddles mount. Read More...
Edward February 03, 2020 for Model Number LFC31925ST does the LG BUTTON ASSEMBLY (ABH74219603) include the two springs?
Stan January 25, 2020 for Model Number LG LFX25991 ST The button assembly of the water dispenser and springs fell out and the springs are lost. I am about to order the following parts: AP5782522 MHY62603705 MHY62603706 1) are these the correct parts? 2) can I repair this from the front without opening up the assembly? Thank you
1 Answer Stan, As far as the repair goes, you will need to remove the dispenser assembly to replace these parts. The parts listed would be the correct parts. Read More...