Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Customer Questions and Answers for Washer Lid by Lg

Best Seller
Manufacturer Part
4.89 (64)
By: Lg
Part Number: OEM17028018
Manufacturer Part Number: AFG73029705

This washer lid covers the top of your washing machine tub and includes the safety switch mechanism. It prevents the washer from operating when open and protects against water splash during cycles. Replace this lid if it's cracked, won't stay closed, or if your washer won't start due to lid switch problems.

More

Questions & Answers

For Lg Washer Lid (Part Number: OEM17028018)

1 Answer

Randy, a putty knife can be used to press into the middle edge of the dispenser cup at the long flat side. This will allow two lock tabs to pass the top panel when the putty knife is pulled up while pressing into the dispenser cup.

Read More...

1 Answer

Shawn,

Unfortunately, with the lid having been discontinued, there would be no suitable replacement available.

Read More...

1 Answer

Mary Jo,

Unfortunately, the manufacturer only had the lid as a complete assembly and there is no way to get the bottom section of the lid.

Read More...

1 Answer

Fenton,

To remove the lid you will need to lift the main top of the unit. 1. Remove 2 screws attaching the backside of the top cover. 2. Lift the top cover at the back of the washer. 3. Push the Top Cover Assembly forward front side until it doesn’t move. 4. Push each side of the cabinet to remove from side holders. If remove the top cover from all of the side holders, lift the top cover. 5. Use the blade to push the left hinge out of the way and to displace the hinge pin to remove the lid. Remove 1 Screw, Cover, and Safety from the Cabinet. 7. According to the environment, place the Top cover on the floor at the side or back of the washer.

Read More...

1 Answer

Texas Yankee,

The lid should be the only component needed and the other parts will just be swapped over.

Read More...

1 Answer

David,

As of 1/10/2019 we are showing this lid as being currently out of stock. This appears to be a special order item which would normally ship within a couple days.

Read More...

1 Answer

Hello Pat,
I'm sorry but those will have to be ordered separately as listed by the manufacturer. Thank you for your patience and understanding in this matter.

Read More...

1 Answer

Hello Mary. Remove the hinge cover. Remove 3 hinge screw. Pull the hinge to the left and right. Remove the hinge. Lift the top. Remove the two door lock attachment screws. Remove the door switch and remove the attachment tube.

Read More...

Have questions? Ask our pros!

Contact us in a way that is convenient for you

Call us 1-877-477-7278
Need Help? Chat with a Pro
Or ask a question by filling in the form

Share your thoughts with other customers

Ask a Question
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google