Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Customer Questions and Answers for Magnetron (Microwave) by Lg

Best Seller
Manufacturer Part
4.89 (64)
By: Lg
Part Number: OEM18130674
Manufacturer Part Number: EAS42812919

This magnetron is the high-voltage tube that produces the microwave energy used to heat food in a countertop microwave. Replacing a failing magnetron restores normal heating performance and stops weak or no-heat conditions. What it does

  • Generates microwave energy that heats food inside the oven cavity
  • Stops microwave from heating when the tube fails or output is reduced
  • May be the cause of loud humming, arcing, or burning smells during operation
  • Works with the oven's high-voltage system and waveguide to deliver even cooking
What's included
  • One magnetron
Install notes
  • Disconnect power before servicing and discharge the high-voltage capacitor; high-voltage components can be lethal
  • Inspect and retain any mounting hardware, gaskets, and the waveguide cover for proper reassembly
  • Do not operate the oven with the waveguide cover or protective shielding removed

More
$107.89

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart

Questions & Answers

For Lg Magnetron (Microwave) (Part Number: OEM18130674)

Steve L for Model Number Kenmore Microwave 72180824500

Everything on this unit works...except the microwave doesn't heat. Talking with others and doing some research, it seems to boil down to possible 4 things. 1. defective magnetron 2. blown internal fuse 3. defective high voltage transformer (capacitor) 4. defective cable assembly (diode) Not really sure if I need specialized equipment to test these items, but do need to know where they are and how to identify and access them. Any additional insight into what the most likely cause of the problem would also be appreciated.

1 Answer

Hello Steve. You will remove the outer cover to access the parts. You most likely have a "high voltage" side malfunction. Transformer, diode, magnetron, Capacitor. You will need to be extremely careful if you decide to test the components with a multi meter, Very high residual voltage is present, so make sure you remove power to the microwave and short across the terminals on the capacitor. The magnetron should have a reading of less than 1 ohm resistance across the two terminals, and an "open" circuit between each terminal and chassis ground. The diode/rectifier should have a resistance reading in one direction only, no resistance, or resistance in both directions indicate a faulty diode. The primary winding on the trans former should read approximately 450 Ohms resistance, the secondary winding should read 80 ohms resistance, and the filament transformer should read 100 ohms resistance. If all the readings are proper and in range, replace the magnetron.

Read More...

Have questions? Ask our pros!

Contact us in a way that is convenient for you

Call us 1-877-477-7278
Need Help? Chat with a Pro
Or ask a question by filling in the form

Share your thoughts with other customers

Ask a Question
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google