John Kullman September 27, 2021 for Model Number LRE30451ST Board # EBR36222901 The Toroid on the Left side bottom got hot and caught fire. No damage to wire to the board. No Heat to the wire to the board. Is it safe to replace the board, due to a failure of the board and not a problem that caused this other then a board failure? Thanks
1 Answer John, If there is no damage to the wiring then yes you would just need to replace the control board. Read More...
Beau November 01, 2016 I have an lg model LFC22740ST the freezer is cold but will not freeze, the fridge seems to be working. I have tested bothe fans, the thermostat in the freezer and everything seems good, it's all clean, there is no build up anywhere do you think the board is what's needed? Also should not that my house had an electrical issue a while back that did harm some appliances but I thought the fridge would be fine because that was almost a year ago and it has been working, fuse is also fine!
1 Answer Beau, You will want to check the evaporator coil in the freezer for a frost pattern. There should be a nice even frost pattern from top to bottom. If there is very little frost on the coils then this would be a sealed system issue and would need a service technician. Read More...
Hunter July 06, 2016 for Model Number LF22740SW My LG piece of crap stopped working all together completely dead control board? fuse looks ok only one fuse Your control baord part is not green on front?
1 Answer Hello Hunter. You will need to replace the board on the unit. The model number will have to be verified on the units I.D. tag since the one listed came up invalid. This will be necessary to look up and specific parts such as the one you requested. Thank you for your patience and understanding in this matter.We will need your model number to help you with this. Please call 1-877-477-7278 or post your model number with a new question on the parts page. http://www.appliancepartspros.com/modelnumber_locator.aspx Read More...
Scott S July 02, 2012 for Model Number lfc20740st Getting error message 67 in freezer. Refrigerator has no lights, fan and compressor are both working. Freezer is cooling but refrigerator is not. No frost build up on back of freezer. All forums that I have came across indicate to replace the control board I would just like to confirm that this would be my problem.
1 Answer Hello Scott. You will need to test and see if there is power coming to the controls and lights inside the refrigerator. If there is power at the connection, you may have a wiring issue. This can cause the damper not to open in the fresh food, and the freezer will work fine, but not the fresh food. If there is no power there, it sounds like the main control board EBR36222901 is bad on the unit and will need to be replaced. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...