Darrell August 04, 2023 for Model Number 795720331112 I have an 795720331112 Kenmore Elite. The front control panel is not coming on, it's not cooling and only the lights on the inside are coming on, no compressor. Is this a control board issue or control panel issue? Is there a way to test both? I can't find any info online other than the compressor reprogramming issue. Thanks.
1 Answer Hello Darrell, this would be a rear-mounted main control board problem the part is EBR73304204, since the ref controls have no response it is not possible to do any testing other than checking all the wire harnesses are connected properly to the board, Read More...
Doug January 03, 2023 for Model Number LFX25973ST/01 Replaced compressor with FLSO075LANA which requires S/W update current board wouldn't update. Will new board EBR73304204 have latest update or will I have to update?
1 Answer Doug, While the new control board would most likely be updated, it still may need to have the update installed. Read More...
Randall June 18, 2021 for Model Number 79572034111 Kenmore Refrigerator - compressor (I think) went out. Not cooling - for frozen lines - all fans are working. Model Number 79572034111 the model of the compressor is LG FC75LBNA which has a 10 year parts and 10 year labor on it which is great. Do I need a programmable board to replace the compressor with the TCA38151706 compressor and if so does the compressor come with the update kit to plug into the board?
1 Answer Randall, It does appear that the control board will need to be updated when replacing the compressor. The kit number is CJT30000002. Read More...
Mike December 03, 2013 for Model Number EAX64121503 Have a Kenmore refrigerator/freezer, had a power failure, unit did not come back on. Found fuse blown on EAX64121503 main control board. Ordered AP5592635 and replaced in unit. Fuse blew immediately. Replaced fuse traced cause to con3 multi connector on board. Left unplugged and refrigerator runs fine. Plugged con3 back in and ran test button. Everything good. Later in the evening the freezer had thawed. Refrige still works but freezer not so much. Any thoughts? Thanks, Mike
1 Answer Hello Mike. You need to check and see if the fan in the freezer is working and also check for an even frost pattern on the coils in the freezer. You could have a reversing valve issue with the unit. Read More...