Steve December 09, 2017 I purchased the replacement parts to replace my bearings and seal. I followed the instruction to disassemble the washer. After removing everything successfully it seems the bearing will not come out. Ive applied the penetrating oil but with the rust its not budging. Ive pounded so hard it appears Ive knocked out the inner bearing porting of one ring leaving the outer ring still inside. Do you have any suggestions at this point?
1 Answer Steve, These are pressed in and you will want to get on the outer racer with a punch and work your way around the racer to get it to come out. Read More...
Mark December 30, 2015 for Model Number WM2016CW I just bought the bearing and seal for my LG Washing machine WM2016CW. In which direction do I install the seal? From looking at the seal it makes a difference in the direction on which it can be installed?
1 Answer Mark, When looking at the seal, one side has some yellow striping on it, that side will face the bearing of the unit. The other side will face out. Read More...
1 Answer Hello Scott. The seals 4036ER2003A and the bearings have to be pressed out and into the tub assembly. Be careful not to bust the tub assembly when doing so. Hope this helps. Read More...