Paul December 20, 2012 for Model Number 795.58813.900 Compressor does not run,everything checks out no power to compressor ......Will a bad sensor cause the mother board to not let power to the compressor or a bad mother board????
1 Answer Hello Paul. Yes, a sensor can, but usually in a case like this it leads to the main PCB 6871JB1410P on the unit. You can test the thermistors on the unit and if they are good, replace the board. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
Joe August 11, 2011 for Model Number 795 Does this sensor control the open door beeper? My refer beeps with both doors closed.
1 Answer Joe, The sensor could be your problem, but, your first check should be at the compartment door switches and wiring " ? Since door switches (A) and (B) are interconnected, if either fails, the other will not respond properly. ? If either switch fails, the light will not come on." Or the control board. Those are the more likely issues for your complaint, Had you supplied us with a proper model number, we could have been a bit more positive. Good Luck and Thnks. Read More...