Larry September 08, 2023 for Model Number WT1701CV How do I access the lid lock for continuity testing? Thanks!!
1 Answer Larry, with the power cord unplugged, there will be one plug at each side of the user interface that would need to be removed along with two screws at the back of the top panel. This will allow the top panel to be lifted up. The door lock switch assembly will be located at the right-hand side of the top panel when looking at it from underneath. Read More...
1 Answer Levi, with the washer turned off, the lid switch would need to be tested for continuity at connection WH from the wire at pin 4 to the wire at pin 5. If there is continuity when the lid is closed, the next step would be to place the meter probes to test from pin 1 to pin 3 when a cycle is started. If there is 16.5VDC, the lid should lock. If it does not lock, the switch assembly has failed. Read More...
Brian June 23, 2021 for Model Number 79631423410 Hello. Can you tell me how to access the lid lock? Thanks.
Madeline September 15, 2019 for Model Number WT1701CV I have a error of dl. I replaced the door lock switch. The machine is still displaying dl what can I do next, and is there a video for it. The lock just keeps locking and unlocking 5 times before the error code dl.
1 Answer Madeline, With having the DL code and the door lock having been replaced then this would be the main control board that is faulty and need to be replaced. Read More...
Nancy January 23, 2019 for Model Number WT1501CW Machine is powering up intermittently and will run fine when it powers up. Power source is good, no error codes or anything indicating an issue. It will chime (like it does when you turn it on regularly) at a low volume and will not do anything further. I've tried unplugging it, doing the reset hitting the power/start buttons 5 times each, etc. I'm thinking it's the control panel from what I'm reading? The machine just turned 1 year old on Monday.
1 Answer Nancy, the main control EBR80321808 could certainly cause this issue and is the most likely. Another part that may cause this issue is going to be the display control. The way to tell would be to test for voltage passing between the two boards. If there is not any voltage passing between the two boards, then the issue would be with the main control. Read More...
Marv December 29, 2017 for Model Number wt1501cw When selecting hot water wash,can't get any hot water only cold.
1 Answer Marv, You will want to check to see if there is 120 vac getting to the hot water valve. If there is but no hot water comes in then this will be an issue of a faulty water valve. If there is no power then this will be a faulty main control board. Read More...
Ed August 09, 2017 for Model Number LG-WT1101CW I get a DL message and a repeating clicking sound when I go to start the machine. This doesn't happen all of the time but it happening with increasing frequency.
1 Answer Hello Ed. Based on the information you provided, it sounds like the door lock assembly EBF61215202 is bad on the unit. Read More...
Sean May 03, 2017 for Model Number LG WT1701CV The washer has power, all controls work except start button. Also is not locking the door.
1 Answer Sean, With the unit working but not starting then this will most likely be caused by a faulty control board EBR80321804. Read More...
Steve April 06, 2017 for Model Number LG washer WT1501CW Error code CL is coming up lid is not locking and washer is not working. Is it a bad washer lid switch ?
1 Answer Steve, The CL is a child lock issue. You use this option to disable the controls. This feature prevents children from changing cycles or operating the machine. Once the Child Lock is set, it must be deactivated before any controls, except power button can be used. Once the washer has shut off, the power button will allow the machine to be turned On, but the controls will be locked. When the controls are locked CL will display alternately with the estimated time remaining. Press and hold the Soil button for three seconds to activate or deactive the child lock. Read More...
Jon May 06, 2016 for Model Number WT1101CW On my LG washer, as soon as I hit the start button, I get a "DE" message (door error) every time and the washer will not start. The door is closed. Will this be the washer lid switch?
1 Answer Hello Jon, This can be the lid switch assembly EBF61215202, a poor electrical connection to the switch, or an issue with the control EBR76262102. Read More...