Nikica T August 11, 2026 for Model Number LREL6325 What is a part # for a switch that regulates left front heating element (two zone).
Mitch May 18, 2026 for Model Number LG LDE441ST I'm trying to replace rotary controller for front left burner, which has two burners (inner/outer). Is this correct part to order? Lg EBF62174907 Range Burner Control Switch OEM Part
1 Answer Mitch, thanks for the question. However, we would need the complete model number and reference numbers for your range to research the correct part for you. Read More...
Ray April 27, 2026 for Model Number LREL6325F The black plastic connector block is melted from this faulty rotary switch. I bought this switch as replacement, but is there a replacement part for the black plastic connector that connects to this unit?
Damion March 09, 2026 for Model Number LSEL6333F/00 Two front burners stuck on high, does not adjust heat (far left and far right ) knobs.
1 Answer Damion, This issue would be caused by the infinite switches that would be faulty. The part number that would be needed and would work on both the front elements will be EBF62174907. Read More...
1 Answer Tom, The part that would cause this issue would be a faulty infinite switch part number EBF62174906. Read More...
Val January 31, 2026 for Model Number LUTE4619SN/00 Front and back burners on right side are high heat only.
1 Answer Val, With the elements working on high only, this would be an issue with the infinite switches EBF62174906 and EBF62174905. Read More...
Derryle September 03, 2025 for Model Number LREL6325F Left front burner would not work on high. Twisting the knob back and forth it would come on high but after at different position on the knob, now it will not come on at all .
1 Answer Hello Derryle, and thank you for choosing AppliancePartsPros.com. Based on what you’ve described, it sounds like the infinite switch EBF62174907 has failed. Read More...
Colin August 26, 2025 for Model Number LSEL6335FE If I turn on any one of the other burners, the far right front burner comes on along with the associated burner. If I just turn on the right front burner, it works normally. Only exception is the center back burner; when I turn that one on, the center back burner does not come on but the right front burner does. Is this a problem with the rotary switch? If so, which one is bad?
1 Answer Colin, Thank you for your question. It would be recommended to make sure that the infinite switch is good and that there is no damaged wiring. Read More...
Dan December 04, 2023 for Model Number LRE4211ST/00 I believe I need the part behind the knob. Are there different ones for each knob according to which burner?
1 Answer DAN, The switch on the far left is part# EBF62174907 & the one on the far right is part# EBF62174905 & the three in the middle are part# EBF62494601 Read More...
Bob Olson November 06, 2023 for Model Number Lre4211 st Front left burner ultra heat switch is bad is this switch a different part number then the other three
1 Answer Bob, This issue will most likely be the relay control board EBR80595403 that is faulty and would need to be replaced. Read More...