Tim May 26, 2020 for Model Number RF267ABRS/XAA-0000 The front display shows all 88 on refrigerator temp, 88 on the freezer. The only difference is the 88 on the refrigerator side shows 88and 8 on the right side the top line is blinking all the time. What should I look for, I can"t set any temps?
1 Answer Tim, the ice maker sensor would need to be tested from the main control DA41-00413J with the power supply cord unplugged. At connection CN90, resistance would need to be measured from the wire at pin 4 to the wire at pin 8. If the ice maker is successfully making ice, the resistance should measure between 7590O to 13290O. If the resistance is not within this range, the ice maker DA97-05422A would need to be replaced. If it is within range, the main control would need to be replaced. Read More...
Tim May 26, 2020 for Model Number RF28HFEDTSR The ref. is letting water go into the frezzer ice maker all the time. The only way to stop it is to cut the water off. Is the board for the ice maker apply to this ref. Are there no water inlet values for this ref?
1 Answer Hello Tim,disconnect the wires going to the water valve, if the water stops then it is the main control board if it does not stop the problem is in the water valve. Read More...